Unsolved
This post is more than 5 years old
2 Posts
0
816
August 19th, 2013 03:00
Control Station (CS0) not boot
Control Station (CS0) not boot, error on rs232 console "Kernel Panic - not synced"!
How can resolve this trouble?
Control Station has recovery mode?
Or re-install operation system into cs0 vnx5300?
This error appeared by turning off the power.
Thanks in advance!
No Events found!
Rainer_EMC
6 Operator
•
8.6K Posts
0
August 19th, 2013 08:00
You could boot from DVD and then try to fix
However I would suggest to open a service request with EMC customer service and let them fix it
Do NOT try to re-install the system – you will risk loosing your data
anarock
2 Posts
0
August 19th, 2013 21:00
This is vnx5300 not have critical data.
Full re-install supported on this equipment if I don't have critical data?
Can be re-initialize VNX5300.
Thanks in advance.