Unsolved
This post is more than 5 years old
14 Posts
0
1336
March 11th, 2016 00:00
nas_environment Status-Codes
Running "nas_environment -info -system", I get the following Information:
| Component Name | = VNX VNX8000 CKM00############# |
| Power Status | = OK |
| Present (watts) | = 5460 |
Rolling Average (watts) = 5463
My question is: What different values can I get for the "Status"?
And not just for the Power information, but for Temperature Status'es as well.
I can not find anything about this in the documentation.
--
D/\N
No Events found!
kelleg
6 Operator
•
4.5K Posts
0
March 11th, 2016 12:00
Not sure how you run naviseccli commands on the FILE side, but the Block side has a environment command that you can use to get the in-let temperature. See page 89 in the attached CLI manual for the VNX2.
Ex.
C:\Users\kelleg>naviseccli -h IP_Address_SPA environment -list -all
Array
Input Power
Status: Valid
Present(watts): 1304
Rolling Average(watts): 1304
SPE9 Enclosure SPE
Input Power
Status: Valid
Present(watts): 560
Rolling Average(watts): 560
Air Inlet Temperature
Status: Valid
Present(degree C): 21
Rolling Average(degree C): 21
glen
1 Attachment
docu47580_VNX-Command-Line-Interface-Reference-for-Block-5.33.pdf
DMJO
14 Posts
0
March 21st, 2016 01:00
Thanks for the feedback. But my question was regarding what Values can the Status-field have?
I have only seen OK here, but what other values can we expect (Warning?, Critical?, Failed?, ...)?
--
D/\N
Rainer_EMC
6 Operator
•
8.6K Posts
0
March 21st, 2016 08:00
You can assume that anything else than OK means there is a problem.