Unsolved
This post is more than 5 years old
2 Intern
•
174 Posts
0
1578
September 14th, 2014 11:00
Non-stop performance data logging in VNX
Hi All,
We have EMC VNX5300 (05.32.000.5.215) and we want to capture performance logging continuously 10 days. But, when i enable this logging maximum run period is 7 days.
Also, i am unable to uncheck "Stop Automatically After" option as this was greyed out.
Please suggest.
Regards,
Dhakshinamoorthy Balasubramanian
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
September 15th, 2014 04:00
If you want long term it is probably for trending – I would suggest to look at VNX M&R or UniSphere Central then
Shweta_K
14 Posts
0
September 15th, 2014 06:00
Try logging out of the Unisphere and log in again, the option then might be available. If that doesnt help then try doing this for 2/3 times.
kelleg
4 Operator
•
4.5K Posts
1
September 19th, 2014 10:00
From the display it shows that you have the unlicensed version of Analyzer that only allows limited access to the full features of Analyzer. Unlicensed Analyze only allows you to select from 1-7 days. If you need more, then you will need to get the Analyzer enabler license.
glen