problem configuring aggregation

Question

Hi, I'm configuring networing on a new vnxe 3100, When I try to setup aggregation I always recive this error 'The changes could not be applied, the following error was encountered: The system encountered an unexpected error. Record the error code and go to the Product Support Page for all your support options. (Error Code:0x6000003)' I've tried to setup aggregation on several interface but the problem is always the same. Is it possible to configure networkin it via ssh or cli? another question, withc type of lacp or etherchannel shoul I configure on switch? Thanks Matteo

errevi_mancio · Accepted Answer

Hi, Today a Emc support man has solved the problem. He've changed some line in a config file in service mode via ssh. thanks Matteo

Shivanand1 · Answer

Hi Matteo,

Please log a service request for the issue with configuring LACP.

Please use the URL https://supportbeta.emc.com/servicecenter/servicecenter_landing.htm for raising a service request.

To take the advantage of port redudency ie configuring LACP, you must be configure it from both VNXe as well as from switch.

Regards

Shivanand

errevi_mancio · Answer

Hi, the SR was resolved in 10 minutes. bye Matteo

SHSTechy · Answer

I have the same issue, how long did it take to resolve?

mtg82814 · Answer

Can you share with us the fix that enabled link aggr? Thanks.

DynaDin · Answer

This problem is fixed in Service Pack3. Please install it. -Dinesh.

mtg82814 · Answer

I installed SP3 (2.0.3.13400).  I have the same exact problem, SP3 did not help. I'm going to call support to have them get this fixed.

nimavat · Answer

@errevi_mancio​ can you help me?? I got error.. The changes could not be applied, the following error was encountered: The system encountered an unexpected error. Please go to Support > Need more help? > Live Chat to chat with EMC support personnel. If this option is not available, contact your service provider.(Error Code:0xc000f0)

DELL-Josh Cr · Answer

Hi,

Thanks for your question.

Do you have any other errors in the logs? The best option is to do what it says and call phone support so they can take a look.

Let us know if you have any additional questions.

VNX

Was this post helpful?