Unsolved
This post is more than 5 years old
11 Posts
0
1481
July 8th, 2011 00:00
Spanning Multiple ISCSI LUN in windows
Hi
as there is limitaion in VNXe on Lun size which is 2 TB max .
now if i want to assinged more than 2 TB lun to windows server then after creating multiple LUN ( 2 TB + 2 TB ) & published them
into windows server then after doing the Stripping those to LUN for one large partition of 4 TB everything works fine
but after rebboting system LUN goes in offline mode
any body has solution for the same becuase i Need 4 TB lun from VNXe
Prasad
No Events found!
AlanZ1
2 Intern
•
790 Posts
0
July 8th, 2011 09:00
Your question has been moved to the Unified Storage community where it has a better chance of being seen by someone who might know the answer.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
July 8th, 2011 10:00
do you have iSCSI initiator set to login at boot time ? Have you tried to configure Bound Volumes/Devices ...this should be the very last tab in iSCSI initiator properties.