1 Message
0
771
June 26th, 2022 15:00
VxRail training question
Hi guys,
I am coursing a VxRail training and I have doubts with this question.
A virtual distributed switch is configured with a default vSAN port group containing one active and one standby uplink. What is the process to configure vSAN traffic to be active on two uplinks?
- (A) Transfer the standby uplink to a second vSAN port group on the same virtual distributed switch, and make it active in the second port group.
- (B) Transfer the standby uplink to a second vSAN port group on a second virtual distributed switch, and make it active on the second port group.
- (C) Create a second virtual distributed switch using any unused uplinks and create a vSAN port group on the new virtual distributed switch.
- (D) Edit the vSAN port group and change the Failover order for uplink.
What do you think is the correct one?. I think that it's the C option.
Many thanks in advance.
0 events found
No Events found!
DELL-Naoyuki K
6 Operator
•
1.9K Posts
•
19.5K Points
1
June 26th, 2022 23:00
D is correct.