Unsolved

This post is more than 5 years old

56 Posts

32705

August 16th, 2006 22:00

Service Control Center Event ID 7026

I have a Dell Dimension 4700 running Windows XP SP2.  There is NO virus or antispyware on it, but...
 
I find in the Event Viewer the following system event record:
 
Event ID 7026
 
The following boot-start or system-start driver(s) failed to load:
abp480n5
adpu160m
aha154x
alc78u2
alc78xx
ALI AGP Bus Filter
AllIde
AMD AGP Bus Filter Driver
amsint
asc
asc3550p
asc3550
cbdif
cd20xmt
CmdIde
Compaq AGP Bus Filter
Cpqarray
dac2w2k
dac960nt
dpti2o
hpn
i2omp
ini910u
Intel AGP Bus Filter
IntelIde
mraid35x
PartMgr
perc1
perc2hib
ql1080
Ql10wnt
ql2160
ql1240
ql1280
SIS AGP Bus Filter
Sparrow
sym_hi
sym_u3
sym8c10
symc8xx
TosIde
ultra
VIA AGP Bus Filter
ViaIde
I can find these drivers by going to: MyComputer>Properties>Hardware>Device Manager>View>Show Hidden Devices, and they are there with a yellow shield with an exclamation mark on them.   All show "This device is not present, is not working properly, or does not have all the drivers installed (Code 24). Each show Root_Legacy_(name of driver)
 
My pc seems to be running fine right now - I just am afraid of what's in the future with this kind of warning.   Anyone have any suggestions to get rid of this Event?  It happens at each boot/startup.

570 Posts

August 17th, 2006 12:00

Read Microsoft's explanation for Code 24 at http://support.microsoft.com/kb/q288302/

56 Posts

August 17th, 2006 13:00

I think you have provided me with the explanation for this - at least the one I wanted to hear - lol.   I really appreciate it - been looking for this for quite some time now - and have considered reinstallation/repair of Windows even.   Now I feel more secure and will just leave it as is.   Thanks!

56 Posts

August 21st, 2006 20:00

 have identified some of the drivers - but I am not sure what the id means - below are the descriptions coded to each driver. Does this help determine if I really need them?  This was a refurbished pc  - is it possible Dell left these drivers on the pc when it was refurbished?  If so, more than like likely, some of them are not needed.   I am running wireless network - using Linksys Wireless  USB Adapter WUSB11 Version 2.6.  I am not sure all this other stuff is needed.  

abp480n5 - AdvanSys SCSI Controller Driver
adpu160m - Adaptec Ultra 160 SCSI Miniport
agp440 - ? No info
agpCPQ - ? No info
aha154x - Adaptec AHA-154x series Miniport
alc78u2 - Adaptec Ultra2 SCSI Miniport
alc78xx - Adaptec Ultra SCSI Miniport
alim1541 - ? No info
AllIde - Ali mini IDE Driver
amdagp - ? No info
amsint - ? No info
asc - AdvanSys SCSI Controller Driver
asc3550p - AdvanSys SCSI Card Driver
asc3550 - AdvanSys Ultra-Wide PCI SCSI Driver
cbdif - CardBus/PCMCIA IDE Miniport Driver
cd20xmt - IBM Portable CD-ROM Drive Miniport
CmdIde - CMD PCI IDE Bus Driver
Cpqarray - Compaq DriveArrayControllerSCSI Miniport
dac2w2k - Mylex Disk Array Controller Driver
dac960nt - Myles Disk Array Controller Driver
dpti2o - DPT SmartRaid Miniport
hpn - NetRaid-4M Miniport Driver
i2omp - I20 Miniport Driver
ini910u - INITO ini910U SCSI Miniport
IntelIde - Intel PCI Miniport Driver
mraid35x - MegaRAIDRAIDControllerDriverfor Windows
perc2 - Perc2 Miniport Driver
perc2hib - Perc2 Hibernate Driver
ql1080 - Miniport Driver for QLogicISP PCI Adapter
Ql10wnt - Miniport Driver for QLogicISP PCI Adapter
ql2160 - Miniport Driver for QLogicISP PCI Adapter
ql1240 - QLogoc ISP PCI Adapters
ql1280 - Miniport Driver for QLogicISP PCI Adapter
SIS AGP Bus Filter - SIS AGP NT Filter
Sparrow - Adaptec AIC 6x60 Series SCSI Miniport
sym_hi - Symbios Hi-Perf SCSI Miniport Driver
sym_u3 - Symbios Ultra3 SCSI Miniport Driver
sym8c10 - Symbios Logic Inc. SCSI Miniport Driver
symc8xx - Symbios 8XX SCSI Miniport Driver
TosIde - Toshiba PCI IDE Controller
ultra - Promise Ultra66 Miniport Driver
VIA AGP Bus Filter - VIA NT AGP Filter
ViaIde - Generic PCI IDE Bus Driver

BTW - this list seems to change a little each time. But most of them remain on the list. I am really confused. Appreciate your help.

570 Posts

August 22nd, 2006 15:00

I agree that you probably don't need those drivers and can be safely removed. But only you can verify if you have SCSI controllers, Disk Array Controller, etc. or not. Use the free program WinDriversBackup to identify and backup the drivers.

Read this
and this

I will also suggest that you use Belarc Advisor to get the information about all the installed hardware in your Dimension 4700. You will need that information later if you have to download device drivers from Dell.

A Clean XP Install will of course fix your system. Don't forget to backup first your important data to non-OS partition or external media (CD/DVD, USB flash drive, USB hard drive, networked computer, etc.)

56 Posts

August 22nd, 2006 17:00

I found the answer which worked in another forum.  It's here for anyone who is experiencing this problem:
 
 
Thanks for the responses in here - at least now I have it solved.   Thanks again.

570 Posts

August 22nd, 2006 18:00

You are Welcome too!

570 Posts

August 22nd, 2006 18:00

Thanks for posting the fix. That's a lot of "remove/reboot" work.

56 Posts

August 22nd, 2006 18:00

You are welcome - you are right - a lot of reboot work - but it solved the problem - patience (which I don't have very much of) sometimes pays off.   Thanks for your concern and posts.   It helps to know there are people out there willing to help.  
No Events found!

Top