Unsolved
This post is more than 5 years old
9 Posts
0
3006
Wyse Win7 Embedded Network Printing
New Dell Wyse box can print to several other printers using windows server provided drivers. HP DJ800 can make prints from several other "Full" machines using server provided driver. Wyse box installs driver for HP DJ800 fine, prints to the server as best I can tell, and gives job sent notice like all other working printers do, but HPDJ800 never kicks up to begin the job. Any ideas?
RMontalvo
560 Posts
0
July 9th, 2018 08:00
AdminNotHR
Without knowing what model or firmware version, I can only provide with very limited recommendations:
1- Verify that your thin client has the latest firmware installed available at: https://appservices.wyse.com/pages/serviceandsupport/support/downloads.asp
2- Verify that your thin client has the latest BIOS version installed at the same link as above.
3- Verify that the client/receiver is installed for the infrastructure you have (Citrix, VMware, Microsoft)
If this does not resolve your issue, please include the model and version of the OS you have installed and what error message you are getting.
AdMinNotHr
9 Posts
0
July 10th, 2018 05:00
Model Wyse 5060 with Windows7 embedded. Still working on getting Bios version and Firmware.
AdMinNotHr
9 Posts
0
July 11th, 2018 04:00
RMontalvo
560 Posts
0
August 7th, 2018 10:00
Imaging of Dell Wyse thin clients is done via the USB Firmware tool, or Wyse Management Suite. You can download the USBFT and documentation from the following url: https://downloads.dell.com/wyse/USBFT/3.1.0/