Start a Conversation

Unsolved

This post is more than 5 years old

12954

June 4th, 2015 08:00

What is the process for creating an OS image for the Wyse Zx0?

What is the process for creating an OS image for the Wyse Zx0?

What is the process for creating an OS image for the Wyse Zx0?
I can boot the installation CD/USB but there is no flash or hard drive and so the Windows install has nowhere to install. Any assistance would be appreciated.

Thanks

200 Posts

June 15th, 2015 08:00

Don't use the blue coloured USB connectors at the backside to connect your USB-CD drive, as these are USB 3.0 and the Windows setup doesn't have drivers for these included.
All other USB connectors are USB 2.0 and work fine without any driver.

June 15th, 2015 08:00

Quote Originally Posted by mhaase View Post
Don't use the blue coloured USB connectors at the backside to connect your USB-CD drive, as these are USB 3.0 and the Windows setup doesn't have drivers for these included.
All other USB connectors are USB 2.0 and work fine without any driver.

I figured this out eventually ;-)

I used a spare SATA drive and connected it to the onboard SATA port.. Pretty straight forward after that.

No Events found!

Top