Unsolved
This post is more than 5 years old
1 Message
0
10162
May 11th, 2015 06:00
Set the FTP server from WDM
Set the FTP server from WDM
Hi guys!
I'm trying to set the FTP server from WDM for a Xenith 2 client to push the xen.ini file automatically. I'm looking at script builder but I can't find wich command should I use (if exists). I need to configure some Xeniths 2 automatically.
I also taking a look to use the DHCP options to make it work. So the first option should be the preferred. Exists any other method to keep on mind to achive this goal?
Any help is welcome
Thanks in advance and best regards.
Rmontalvo1
623 Posts
0
May 11th, 2015 06:00
Try adding the parameter
FileServer=
to the Xen.INI file or add option tag 161 to your DHCP server. You can find this information in the Xenith Admin guide available at www.wyse.com/manuals .
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]