Unsolved
This post is more than 5 years old
5 Posts
0
974
June 30th, 2020 06:00
Help with graphics settings
Hi Need help doing this
TIA
Lee
No Events found!
Unsolved
This post is more than 5 years old
5 Posts
0
974
June 30th, 2020 06:00
Hi Need help doing this
TIA
Lee
Top
speedstep
11 Legend
•
47K Posts
0
June 30th, 2020 06:00
dell does not support Dentalcad
https://www.egsolutions.com/support/faq/
https://www.egsolutions.com/wp-content/uploads/2019/07/Brochure_DentalCad_web.pdf
https://www.egsolutions.com/products/dental-products/dental-software/dentalcad/
Mullo1234
5 Posts
0
June 30th, 2020 09:00
GKDesigns
258 Posts
0
June 30th, 2020 09:00
@Mullo1234
You didn't ask a question and your image is difficult to read. You left it to the reader to figure out what you want.
It seems odd that the application doesn't use the currently active GPU. The message suggests your system is using the lessor integrate Intel GPU, and not the better discrete nVidia GPU. Which GPU is your system normally using?
I would confirm that the nVidia GPU is installed and working, and then investigate both the application and the nVidia driver for an option to do what the message suggests.
Ultimately, contact the application Support folks for advice (it's their message) after you understand your system's GPU configuration.
GK
Mullo1234
5 Posts
0
June 30th, 2020 11:00
Tried that....Nothing changes and not much of a menu....
Mullo1234
5 Posts
0
June 30th, 2020 11:00
The question was in the attached image, sorry its not too clear and thanks for the advice..Much appreciated.
Mullo1234
5 Posts
0
June 30th, 2020 11:00
All sorted.
I had my monitor plugged into the wrong port....