Recommendations for a micro SD card adapter?

Question

Something that will not stick out, but can be removed?  Or the required dimensions? thanks

eslonim · Accepted Answer

Thanks for the reminder - the BaseQI model model 731A fits perfectly into my XPS 9500. It is almost precisely flush, but can easily be removed with a fingernail. I put it in and forgot it - (large micro SD card to store movies etc).

Mary G · Answer

Google micro SD card adapter for lots of options. You don't say what computer you have. You normally can't add anything internally on a laptop.

eslonim · Answer

Sorry, I meant a short adapter for the XPS 15 9500 -that I can leave in without danger of being damaged, and remove if needed.

eslonim · Answer

I see the BaseQI line (expensive) fit various XPS models - none specifically for the 9500. I bought two  cheap adapters on Ali Express which fit, but didn't work at all (I suspect contacts didn't reach the contacts inside the slot

eslonim · Answer

As accurately as I can measure (using a full size adapter), the xps 9500 slot has a depth of 22.5mm.  So I could order the 23mm version from BaseQi - the 731A is what BaseQi recommended, stating that it will stick out a 'little bit'

lawbar2 · Answer

Did you try the 23mm yet?  I tried my adapter from my Surface Book 2.  It's 20mm and was a tad too deep to where I couldn't pull it out without removing the baseplate.  The model for the 103A is 21.3mm I estimate will be more flush.  I have it in my Amazon cart, but haven't pulled the trigger yet.