
UNSOLVED
Closed
M
magoogirl34
17 Posts
0
1946
March 11th, 2004 00:00
Regarding the overheating problem
Howdy,
I just got my 5100 last week and am quite happy with the machine. It's my first laptop, so I am enjoying not being chained to a desk. However, straight away I thought the fan placement/design was a bit odd. So, I have a small block of wood that i prop the back of the machine on (the little rubber feet rest on the wood)
I wanted to make sure i understood the weekly-blowing-of-the-dust ritual, however. Can I use the compressed air that comes in the cans? And then I simply blow it into the back air vents, correct? How long a burst of the air?
Thanks in advance!
Magoogirl
I just got my 5100 last week and am quite happy with the machine. It's my first laptop, so I am enjoying not being chained to a desk. However, straight away I thought the fan placement/design was a bit odd. So, I have a small block of wood that i prop the back of the machine on (the little rubber feet rest on the wood)
I wanted to make sure i understood the weekly-blowing-of-the-dust ritual, however. Can I use the compressed air that comes in the cans? And then I simply blow it into the back air vents, correct? How long a burst of the air?
Thanks in advance!
Magoogirl
Responses (3)
Solutions (0)
magoogirl34
17 Posts
343
0
Posted March 11th, 2004 03:00
Thanks Parkerti,
Glad to hear you've had no problems because i use my pc's very hard as well.... they are on nearly all day long as my work is based on the computers/internet. :)
MagoogirlI too have never had any problems, and mine has been on nearly all day since i received it over 6mths ago.... I dismantled it a few weeks back and my fan and heatsink were caked in dust, but a quick blast of air and everything was clear again, and the fan def comes on a lot less now.

parkerti
610 Posts
343
0
Posted March 11th, 2004 00:00
Tim