‎VCB backup failure + Networker 7.6 + ESX 4.0 | DELL Technologies

Start a Conversation

ahmedvienna

updated

16 years ago

Solved!

ahmedvienna

1 Rookie

•

23 Posts

0

2183

March 24th, 2010 06:00

VCB backup failure + Networker 7.6 + ESX 4.0

Hello,

I was trying to do a VCB backup using networker 7.4 + VCB 1.5

I am doing the backup over the SAN.

the lun is shared.

and actually another VM is on that same LUN which I was sucessfull in running a backup.

Here is the error that was displayed for that specific saveset/machine.

'save_vcb.bat' is not recognized as an internal or external command,

operable program or batch file.

Thanks

Ahmed

N
NWadmin1
89 Posts
606
0
Posted March 30th, 2010 03:00
Hi,

Is it NetWorker version 7.4 or 7.6?

NetWorker version 7.6 use nsrvcb_save

Regards,

Mustafa
K
Katans
4 Posts
606
0
Posted March 25th, 2010 06:00
Hi,

Try to follow the steps recommended in VCB admin guide. You need to run install.bat (from legato directory installed in VCB directory). After you pass through all the steps, the save_vcb.bat will be copied to legato\nsr\bin and should work.

Of course you need to fill up "config.js".

Catalin
R
rpervan
266 Posts
606
0
Posted March 26th, 2010 11:00
Hello,

you will need to use VCB 1.5 update 1 to save the VMs using VCB.

regards,

Rej
A
ahmedvienna
1 Rookie
•
23 Posts
606
0
Posted March 30th, 2010 04:00
Sorry guys, problem is solved by putting in the client backup command the following : nsrvcb_save
I made a mistake..
Thanks
U
unexpected1
34 Posts
606
0
Posted July 20th, 2010 05:00
Related to this, I noticed the following:

When you create a new client by selecting a VM from the Virtualization view in the "Configuration" and you select virtual client, VCB,... and the lot, it still puts "save_vcb.bat" in the backup command even though NW 7.6 uses "nsrvcb_save" ...

Has anyone else noticed this and is it a bug?

Thanks!