Start a Conversation
UNSOLVED

Non4me

updated

8 years ago

N

Non4me

3 Posts

0

10867

April 3rd, 2018 10:00

CPLD update issue

Dear all,

 

I have a stack with 2x N2048 + 2x N2048P. Yesterday, I have the firmware has been upgraded from 6.1.1.7 to 6.5.1.1 and the boot code has been updated from U-Boot 2012.10-00076-g49fadd9 (2014) to U-Boot 2012.10-00079-g20827d2 (2017).

And I tried to update CPLD from v13 to v20 on the Master, logs here : https://pastebin.com/Ctnp5RxJ

My master became Unit2, after a reload of the stack it came back to normal and the master went back to Unit1. And after the reload of the stack, the CPLD of my master (Unit1) is still in v13 :

CPLD Version...................... 13
Image File........................ N2000Stdv6.5.1.1

 

Question :

- Why did my master go from Unit1 to Unit2?

- Why my Master still in CPLD 13 when the upgrade operation seems to have gone well?

- How to correct this?

 

Thanks for your appreciated help.

  • N

    Non4me

    3 Posts

    10245

    0

    Posted April 3rd, 2018 11:00

    Thanks for your prompt reply.

     

    >show switch

        Management Standby   Preconfig     Plugged-in    Switch        Code
    SW  Status     Status    Model ID      Model ID      Status        Version
    --- ---------- --------- ------------- ------------- ------------- -----------
    1   Stack Mbr  Oper Stby N2048         N2048         OK            6.5.1.1
    2   Mgmt Sw              N2048         N2048         OK            6.5.1.1
    3   Stack Mbr            N2048P        N2048P        OK            6.5.1.1
    4   Stack Mbr            N2048P        N2048P        OK            6.5.1.1

     

    >show version

    Machine Description............... Dell EMC Networking Switch
    System Model ID................... N2048
    Machine Type...................... Dell EMC Networking N2048
    Serial Number..................... x
    Manufacturer...................... 0xbc00
    Burned In MAC Address............. F8B1.5650.xxxx
    System Object ID.................. 1.3.6.1.4.1.674.10895.3054
    SOC Version....................... BCM56340_A0
    HW Version........................ 5
    CPLD Version...................... 13
    Image File........................ N2000Stdv6.5.1.1
    Software Capability............... Stack Limit = 12, VLAN Limit = 4093

    unit active      backup      current-active next-active
    ---- ----------- ----------- -------------- --------------
    1    6.5.1.1     6.1.1.7     6.5.1.1        6.5.1.1
    2    6.5.1.1     6.1.1.7     6.5.1.1        6.5.1.1
    3    6.5.1.1     6.1.1.7     6.5.1.1        6.5.1.1
    4    6.5.1.1     6.1.1.7     6.5.1.1        6.5.1.1

  • N

    Non4me

    3 Posts

    10229

    0

    Posted April 3rd, 2018 14:00

    Hello,


     yes I know. I have read this documentation.My problem is not whether I should update CPLD or not...

    Please can you re-read my questions in my first post ?


    Thanks

  • J

    Jaxon62

    1 Rookie

    •

    80 Posts

    •

    5 Points

    8282

    0

    Posted November 30th, 2018 14:00

    Hi Daniel

    Thank you for the very useful information, it helped me to review what was happening with my switch stack, however I have one switch with cpld v20 and one with cpld 15 - how do I get the second switch in the stack to go to v20?  Hmm that was weird … I just checked again and switch 2 has now gone to CPLD v20 - thought transference perhaps.

     

    Thanks

    E.

     

Dell Support Resources

Latest Solutions

View More