Help

Start a discussion
UNSOLVED

ArcheNoah

updated

6 years ago

A

ArcheNoah

2 Posts

0

673

August 11th, 2020 07:00

PC 5548 Second IP Interface

Hello,

i have a PowerConnect 5548 with an ip adress in den Default VLAN 1. I can access it over the web gui an telnet.

Now I have set up a management VLAN that runs through the entire network with all switches. I was able to change all other switches to IP addresses from the VLAN 666 (management).
It does not work with the PowerConnect 5548. I have created a second IPv4 interface. I can ping it, but access via TelNet or the Web GUI does not work.

How i can access the Web Gui with the ip address from the new VLAN 666?

ArcheNoah_0-1597155577206.png

Thanks!

  • DC

    DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    519

    0

    Posted August 11th, 2020 13:00

    ArcheNoah,

     

    If you can ping the IP address you assigned to the VLAN, but cannot access it via SSH or webGUI, you might have a duplicate VLAN or an ACL or management control in place to deny the traffic. I'd be curious if you removed the IP address from the VLAN if you could still ping it.
    Would you be able to verify that?
     
    Let me know.
     
     
     

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • A

    ArcheNoah

    2 Posts

    501

    0

    Posted August 12th, 2020 00:00

    Hi Chris,

    the problem are the access profiles. Thanks for the hint! Now it works

Dell Support Resources

Latest Solutions

View More