UNSOLVED
PowerConnect 2824 vlan
Hi,
Need help with configuration of VLAN. Let me know what am I missing..
VLAN1 - port 1 - 192.168.2.2
U
VLAN 110 - port 10-15/23-24
U - U / T-T
VLAN 111 - port 16 -22/23-24
U - U / T-T
I configured the router to have 110 vlan and terminate the cable in port 23 of the powerconnect swtich. Tried to put a computer in port 10 that has a IP of 192.168.2.10. The computer can't connect to the internet.
Questions:
1. Is my setup correct? where should I look to troubleshoot?
2. How can I access the Web interface after this setup?
1195
0
Posted February 5th, 2019 08:00
I would use one of the untagged ports that is on the same vlan as the client.
1197
0
Posted February 5th, 2019 08:00
Hi,
With my previous setup above.
Can you tell which port I should be in order to connect to web interface?
1190
0
Posted February 5th, 2019 10:00
Here is the setup.
I use g23 or g24 to connect to the router.
I use port 7 for my computer (192.168.2.10), vlan 110. I can't access the web interface 192.168.2.2
DELL-Josh Cr
Community Manager
•
9698 Posts
•
43691 Points
1215
0
Posted February 4th, 2019 09:00
Hi,
Page 128, are they configured to admit all https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/powerconnect-2824_user%27s%20guide_en-us.pdf
You should be able to use the VLAN ip address to access the web interface.