Becuase you didn't post the full ipconfig output, it is unclear if this is from the problem machine or which network adapter it represents.   Whichever one it represents, however, has a problem likely becuase DHCP is set to NO, which means that it will never get an IP address.  Please clarify!

 

Steve

Please post the ipconfig /all output in its entirety and all in one place!

 

Steve

Also, I had these two computers up and running last week, but for some reason I develop this problem in both computer. Hope this information is helpful.

Thanks for your response, This is what else on the page:

Tunnel adapter automatic Tunneling,Pseudo-Interface

Connection...Specific DNS Suffix

Description...Automatic Tunneling Pseudo- Interface

Physical Address... A9-FE-49-bc

Dhcp Enable...No

IP Address... fe80::5e:169.254.73.100%2

DNS Server... fec0:0:0:ffff::1%1

                                           2%1

                                           3%1

                                           4%1

 

Hope this gives you the infomation that will help you figure out what I have done wrong. I have look at other posts and try to use that info to correct my problems.

       Physical Address. . . . . . . . . : A9-FE-49-BC
       Dhcp Enabled. . . . . . . . . . . : No
       IP Address. . . . . . . . . . . . : fe80::5efe:169.254.73.188%2
       Default Gateway . . . . . . . . . :
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Automatic Tunneling Pseudo-Interface:

       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface

       Physical Address. . . . . . . . . : C0-A8-01-64
       Dhcp Enabled. . . . . . . . . . . : No
       IP Address. . . . . . . . . . . . : fe80::5efe:192.168.1.100%2
       Default Gateway . . . . . . . . . :
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Documents and Settings\Katelyn>

 

Thanks see if this helps and thanks for you time.

I guess I don't have a clue how to save it to a text file. I right click and copy is not highlighted. And hints on this, I appreciate it.

In the command prompt window, move the mouse to the top so the curser is in the blue area.  Right click, choose Edit and then choose - Select All.  Right click in the blue area again, choose Edit and then choose Copy.  Open a reply to this email.  Put the cursor in the area where you would normally type.  Right click and select Paste.

 

Steve

When I hit run and put cmd and then put in ipconfig/all, this is all that pops up. I was looking at some other posts and where it says"description" theirs talks about their adapter, I have "WLAN 1350 WLAN Mini PCI Card #2", don't know if that helps any. I have got my settings set on IP automatic and DNS Server on automatic.Thanks again.

You still didn't get the whole thing.  What you have posted indicates two problems.  First, you need to get rid of IP v6, and second, assuming that what you have posted represents your wireless network adapter (can't be sure until I see the whole thing), you need to set the TCP/IP properties to obtain an IP address automatically.   Try one more time to see if you can post the whole output.

 

Steve

Let's uninstall the IP V6, which should not be needed and interferes with other things.  To do this, see the following:

 

http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_ip_v6_pro_remove.mspx?mfr=true

 

Then try running the ipconfig /all command again.  This time, you might want to open Notepad, copy the text of the ip command into notepad and then, once you are sure you have the whole thing, copy it out of Notepad and paste it into a reply.

 

Steve