So i tried fixing my dell 3010 opitplex and it wouldn’t turn on so when i finally got it to turn on i keep getting this led 1 error not sure what to do youtube didn’t help
According to diagnostic LEDs indicates a possible system board failure has occurred. Remove all adapter cards from PCIe slot and adding them back one by one until you find the faulty card. See below.
Chino de Oro
11 Legend
•
8458 Posts
•
46451 Points
0
0
Posted May 17th, 2025 11:22
According to diagnostic LEDs indicates a possible system board failure has occurred. Remove all adapter cards from PCIe slot and adding them back one by one until you find the faulty card. See below.
For a system with many years in age, replace a new coin cell battery as an essential maintenance. Clear CMOS with jumper and adjust BIOS settings to match with hardware setup.