UNSOLVED
F
FATHER_FBI
1 Rookie
•
7 Posts
0
503
December 12th, 2021 06:00
Dell T7920 + Dynatron B11
The question is more for Dell engineers, given the design of the standard heatsink and the contact patch with the processor.
I had a desire to replace standard radiators with Dynatron B11.
Neither can I find the exact dimensions of a standard radiator anywhere in order to understand whether Dynatron radiators can normally cover the plastic casing.
Since I will only be receiving my workstation in a month, I would greatly appreciate any information regarding the dimensions of Dell's standard heatsink.
262
0
Posted February 22nd, 2022 23:00
Thanks for your reply.
I found a way out, I found a factory in China that manufactures heatsinks for servers and workstations. They have a radiator in stock that is the size of the original Dell radiator, but only they have a normal radiator with a heat sink of 200 watts.
Rain_HH
2 Intern
•
60 Posts
•
6 Points
267
0
Posted February 22nd, 2022 18:00
I have tried this. This does not work. I subsequently returned the B11 heatsink. The heatsink would not fit inside the Air Shroud. Even if you remove the Air Shroud completely, the base black frame separating the memory modules would not allow such installation. In the end I made some modifications and added some fans to the original heatsinks and the temperature is just fine using a dual Platinum Xeon.