UNSOLVED

Marilyn2U

updated

21 years ago

M

Marilyn2U

4 Posts

0

1307

July 10th, 2005 17:00

Removing CD-ROM

I've disconnected the jumpers, but can't get the drive to budge out.  Does it just slide out or am I missing something?
  • osprey4

    6 Operator

    34230 Posts

    114

    0

    Posted July 10th, 2005 17:00

    Here are the instructions:

    http://support.dell.com/support/edocs/systems/dim3000/en/SM/parts.htm#wp1077842

    Looks like the drive should slide out the front of the case.

  • Marilyn2U

    4 Posts

    114

    0

    Posted July 10th, 2005 17:00

    It looks like there is a securing screw, however, what I am trying to do is remove the broken upper CD-ROM to a DVD-ROM (not a burner).  The lower drive has my DVD Burner.  The screw looks like it's just for the lower burner, I'll have to check again...
     
    Thanks for the help.. 
     
    Marilyn
  • osprey4

    6 Operator

    34230 Posts

    114

    0

    Posted July 10th, 2005 17:00

    It depends on which system you have. Please post that.
  • Marilyn2U

    4 Posts

    114

    0

    Posted July 10th, 2005 17:00

    Dell Demension 2400 Series
  • FoeHammer

    4 Posts

    114

    0

    Posted July 10th, 2005 21:00

    Did you remember to remove the front panel of the case? The drive won't slide out otherwise.
  • Marilyn2U

    4 Posts

    114

    0

    Posted July 11th, 2005 12:00

    Yes, thank you, I removed the front pannel.. and I found the screw.  It was hiding just slightly below the lip of the case.  I just had to screw it out at an angle.