UNSOLVED
K
KattenDTapia
31 Posts
1
3993
September 9th, 2011 11:00
NDMP VNXe 3100 with Symantec Netbackup
Trying to configure NDMP backups with our Symantec Netbackup environment.
I was able to successfully authenticate to our CIFS server.
I run the job and get the following errors:
9/9/2011 12:58:19 PM - Error ndmpagent(pid=2344) MOVER_HALTED unexpected reason = 4 (NDMP_MOVER_HALT_CONNECT_ERROR)
9/9/2011 12:58:20 PM - Error ndmpagent(pid=2344) NDMP_LOG_ERROR 0 SnapSure file system creation fails
9/9/2011 12:58:21 PM - Error ndmpagent(pid=2344) DATA_HALTED error, reason = 2 (NDMP_DATA_HALT_ABORTED)
9/9/2011 12:58:22 PM - Error ndmpagent(pid=2344) NDMP backup failed, path = //lon-eu-app-01/c$/LON-EU-APP-01
Can't seem to figure it out.
Has anyone succesfully configured NDMP jobs with Symantec Netbackup?
Rainer_EMC
6 Operator
•
8645 Posts
1197
0
Posted September 9th, 2011 11:00
On the NetBackup side
Look for a Snapshot variable
KattenDTapia
31 Posts
1197
0
Posted September 9th, 2011 11:00
This isn't supported on the VNXe 3100?
If that's the case were do I turn off automatic snapshot? At the netbackup level?
Thanks,
Damian
Rainer_EMC
6 Operator
•
8645 Posts
1197
0
Posted September 12th, 2011 17:00
Does it work now ?
Rainer
umichklewis
4 Apprentice
•
1190 Posts
1197
0
Posted April 24th, 2013 10:00
Netbackup should allow you to disable calling a snapshot in the backup policy. Add a line that reads "Snapsure = NO" and see if that works for you.
Let us know if that helps!
Karl
Yes you can enable snapshots on VNXe.
To enable snapshots.
>Login to VNXe web GUI (Unisphere.)
> select storage tab.
>select Filesystem and select protection size tab.
(Protection space is a space allocated for snapshots. and its completely separated from File system (FS) size. hence configuring protection space wont take space from FS but it will claim it from storage pool.[considering VNXe has enough space in storage pool]) ).
Now once you have allocated enough protection space (default 100% of FS size). you should be able to take snapshots on that FS.
let me know if you still have an issues? and if its resolved please post your solution.
Rainer_EMC
6 Operator
•
8645 Posts
1197
0
Posted September 9th, 2011 11:00
Looks like you are trying NDMP with automatic snapshot or VBB which isn't supported