Browse Community
Language
Help
Sign In
Posts
Users
Search
LARO
updated
16 years ago
1 Message
0
546
March 28th, 2011 03:00
Hi,
Is it possible to use SAN Copy between: - HDS 9570v and VNX - AX100 and VNX
The elab interropability is empty when I select VNX and SAN Copy. That works with CX3 or CX4. Could I use the same matrix with CX for VNX?
Thanks,
BR
Responses (2)
Solutions (0)
Kumar_A
2 Intern
•
727 Posts
265
Posted March 29th, 2011 15:00
The midrange EMC arrays are covered in the RNs (AX100 is there).
SANCopy release notes are here:
Here is a direct link to the SANCopy release notes:
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-011-964.pdf
For 3rd party, you have to use elab. If it is not present in the elab matrix, an RPQ would be required, but if the 3rd party array you are looking for is qualified with CX3/CX4 there would be a high probability of approval.
Rainer_EMC
6 Operator
8645 Posts
Posted March 29th, 2011 16:00
Also eLab seems to be a bit „late” with some of the VNX info – if you check again in a couple of days it might be in there
Self Repair, Upgrade & Maintain
Diagnostics and Tools
Drivers & Downloads
Solve
Monitors
21
5
Inspiron
9
2
95
1
7
XPS
44
3
Precision Mobile Workstations
24
8
View More
Kumar_A
2 Intern
•
727 Posts
265
0
Posted March 29th, 2011 15:00
The midrange EMC arrays are covered in the RNs (AX100 is there).
SANCopy release notes are here:
Here is a direct link to the SANCopy release notes:
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-011-964.pdf
For 3rd party, you have to use elab. If it is not present in the elab matrix, an RPQ would be required, but if the 3rd party array you are looking for is qualified with CX3/CX4 there would be a high probability of approval.