NetWorker/NetApp NDMP solution/integration can be designed in two ways...!!!
1) Local NDMP backup ==> where you backup to locally attached devices on NAS side
2) LAN based NDMP backup ==> where NDMP data from NAS is stream over LAN to NetWorker storage nodes(Windows or Unix host)
In both cases there is no Networker Software Agent required on the NAS side.
The backup happens via NDMP protocol which all NAS has.
As far as SAN goes, it is recommended that all backup resources ie: NetWorker Server, NAS host and library/tape drives be SAN zoned together for sharing purposes of say tape drives.
If there is no sharing of resources, then zoning can be independent for whatever purposes.
Once systems are TCP/IP reachable, you are set to go with NetWorker NDMP implementation through Client resource creation, assignment of Client to Group, Group assignment to pools and ultimately devices assignment to Pools
You might want to look at thes video and white papers, all of which are available from powerlink.emc.com. They should help show how you can configure NetWorker to backup your NAS
MikeToo1
38 Posts
831
1
Posted September 17th, 2010 06:00