Hello

Console redirection is not enabled by default. The serial communication options and default settings are covered in the R710 manual:

www.dell.com/support/home/product-support/product/poweredge-r710/

You can find iDRAC manuals on the iDRAC support page:

www.dell.com/support/home/product-support/product/integrated-dell-remote-access-cntrllr-6-for-monolithic-srvr-v1.95/

Thanks

Thanks Daniel,

I found a manual with serial connection details on page #63. Could you please confirm the link and page 63. I should be able to hook up the serial cable from serial port to laptop with given baud settings and get to console right using below?

http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r710_owner%27s%20manual_en-us.pdf

Thanks Daniel,

Below cable should be good enough to work with it right?

https://www.walmart.com/ip/Startech-1-Port-USB-to-Null-Modem-RS232-DB9-Serial-DCE-Adapter-Cable-with-FTDI/21097418

Yes, you should be able to connect to the system via serial using the listed default settings as long as the defaults have not been changed.

---

@shre patil wrote:

Below cable should be good enough to work with it right?

https://www.walmart.com/ip/Startech-1-Port-USB-to-Null-Modem-RS232-DB9-Serial-DCE-Adapter-Cable-with-FTDI/21097418

---

I don't know. I have used a DB9 to serial adapter at home and I experienced issues. I remember installing a driver for the adapter that had a configuration application with it. I was able to get the OS and applications to detect the adapter as a serial device and assign it to a COM port. I still experienced a lot of issues using it with PowerConnect switches. I ended up using a normal serial cable because of all of the issues.

Thanks

Thanks Dan,

Could you please suggest which normal serial cable you used? I mean where you connected the cable to server end? which port ? I can buy that as well to try if this doesn't work..

Thanks Dan,

Could you please suggest which normal serial cable you used? I mean where you connected the cable to server end? which port ? I can buy that as well to try if this doesn't work..

The exact specifications of the cable are on page 101 of the iDRAC manual. I linked the iDRAC support page earlier, you can find the manual on that support page. Any normal DB9 null modem serial cable should work. Here is one available on our site:

http://accessories.us.dell.com/sna/productdetail.aspx?sku=A7011245

Thanks

Thanks.. The links says sold out. Can you please check. Any other link for that one?