Solved!
Go to SolutionPowerFlex integration with vROPs 8.1
Hello,
We are running PowerFlex 3.5.1 and we have been trying to integrate it with vROPs 8.1.
We have installed the adapter but are having a rough time configurating the adapter instances.
We've tried setting up the MDM and Gateway adapters but for some reason 'validate connection' fails without too much information.
We've followed the guide at: https://vineethac.blogspot.com/2020/10/dell-emc-powerflex-mp-for-vrops-8x.html?m=1
We have the following configured:
Name: powerflex-manager
Managenent IP or hostname: [ip of the primary MDM taken from the GUI]
Port: 443
Instance Type: PowerFlex Manager
System Name: powerflex-manager
Credentials:
Kind: PowerFlex Manager Adapter Credentials
Name: powerflex-manager
Username: [username used to connect to the MDM]
Passowrd: [password used to connect to the MDM]
PowerFlex Manager Domain Name: VXFMLOCAL.
The error I am getting: Unable to connect to the specified target. Please validate the instance type, hostname/IP, port and credentials.
Something is obviously not configured correctly.
What am I missing?
Thank!
Hi ,
You said you are using the PowerFlex Manager adapter instance type:
"Name: powerflex-manager
Managenent IP or hostname: [ip of the primary MDM taken from the GUI]"
You should be using the management IP address of the PowerFlex Manager and not the ip of the master MDM.
Try that and see how it goes.
gc_emc
45 Posts
1392
0
Posted December 26th, 2020 01:00
Hi ,
Following are the adapter instances that can be configured:
•PowerFlexGateway
•PowerFlex Manager
•PowerFlex Node
•PowerFlex Networking
As mentioned:
a.PowerFlexGateway:Use the management IP address of PowerFlexGateway.
b.PowerFlex Manager:Use the management IP address of PowerFlex Manager.
c.PowerFlex Node:Use the management IP address range of iDRACs. Configure the following AdvancedSettings:•PowerFlex Management Controller vCenter Server
d.PowerFlex Networking:Use the management IP address range of Cisco network switches.
Going by the guide below it looks like PowerFlex Manager is a minimum required.
https://infohub.delltechnologies.com/section-assets/powerflexadapter-for-vrops-product-guide