I am working with an MD3000i controller with a failed firmware update. According to the console it looks like it is trying to load the firmware and cannot. The firmware upgrade application is no longer able to connect to the controller. Is there a way to reload from the console?

Console output:

02/28/14-23:40:59 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
02/28/14-23:40:59 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE failed. Stat f000
02/28/14-23:40:59 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State 4543
02/28/14-23:40:59 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
02/28/14-23:41:00 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image 03.00.01.47 from 0315a120 4c0c8 bytes , result 0
02/28/14-23:41:27 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion timeout
02/28/14-23:41:27 (GMT) (tRAID): WARN: QLMailboxCommand: command completion timeout, cmd = 0x69
02/28/14-23:41:28 (GMT) (tRAID): NOTE: Qlogic coredump file written to '6B53VK1:/tmp/QLogic_Coredump_port_0_6B53VK1',rc 204E50, expec ted 204E50
02/28/14-23:41:28 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose returned -1