Help

Start a discussion
UNSOLVED

cdotadmin

updated

19 years ago

C

cdotadmin

15 Posts

0

519

May 3rd, 2007 14:00

Celerra Manager 5.4 - System Status- Red X

System Status shows a Red X
Hardware status shows
Clariion CX500 Warning
Shelf 0/0 SP A Is Ready to Restore

This has happened in the past and EMC tech support had dialed in and fixed it.

I would like to know what causes it, and how I can fix it myself.

Thanks. Robin Cole -Colo DOT
  • D

    dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    161

    0

    Posted May 3rd, 2007 14:00

    one or more luns on clariion thats presented to celera has trasspased. go into navisphere and see which one has trespaased from its default owner and traspass it back.
  • D

    dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    161

    0

    Posted May 3rd, 2007 19:00

    or better yet run this command:

    nas_storage -info id=APM00051906566

    where APM is the id for your Clariion. You will see this output, look for entry

    failed_over           = False


    if it's true that means that you have luns that have trespassed. Run this command to fail them back their default owners.

    nas_storage -failback id=APM00051906566


    at that point i would refresh you Celerra Manager GUI ..and it should look ok. You might have to manually "Accept" the alert to clear it.

Dell Support Resources

Latest Solutions

View More