Solved!
Go to SolutionHi
I found this in DPA Guide
1. Open /usr/openv/netbackup/bp.conf for editing and add the following line:
SERVER =Collectorhost
where
Collectorhost is the Collector’s hostname. The Collector’s hostname must be
resolvable by the Master Server.
2. Restart NetBackup on the Master Server for the changes take effect.
what is collectorhost ? is it name of DPA Server?
David_Hampson_90e289
2 Intern
•
243 Posts
974
0
Posted March 4th, 2011 02:00
The easiest way to set your proxy - in the GUI add your new host by going to Node > New > System, go to Assignations:
choose Add and add the relevant collector requests for your new host, highlight the requests, choose Edit:
- then check the Proxy Host box and add the name of your proxy here which will be another host which has the DPA collector installed on it (click the Browse button and find it in the list); you may need to add a credential which is basically a login ID if you need one (click Edit to add one).
After making the change you need to right click on the host and choose Administration > reload collectors
To get back to the boxes above to make amendments right click on the host and choose Administration > Properties... Remember to reload the collector after any amendments are made.