ConGroup problem – mainframe environment.

I ’ve a problem with ‘ConGroup’ started task.

When I use SCF version 5.7 and ConGroup version 6.3 – every think works fine.

For a test, I’ve installed new Mainframe Enabler 7.0 (level EMC7002). New SCF works fine, SRDF works too. The problem is with ConGroup started task.

When I start PROC – procedure ended with RC=0 without any other messages:

See a example below:

1                      J E S 2  J O B  L O G  --  S Y S T E M  R U T 1  --  N O D E  N B R U T

0

19.23.47 STC03160 ---- THURSDAY,  07 JAN 2010 ----

19.23.47 STC03160  IEF695I START EMCCGP   WITH JOBNAME EMCCGP   IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN

19.23.47 STC03160  $HASP373 EMCCGP   STARTED

19.23.47 STC03160  IEF403I EMCCGP - STARTED - TIME=19.23.47

19.23.48 STC03160  CGRP000I ConGroup V7.0 (11/09/09-13.55 SCGP700-SC70007) Initializing

19.23.48 STC03160  EMCP001I MODE=SINGLE

19.23.48 STC03160  EMCP001I MSGLEVEL(5) STOPIEN SZCZEGOLOWOSCI KOMUNIKATOW

19.23.48 STC03160  -                                              --TIMINGS (MINS.)--            -----PAGING COUNTS----

19.23.48 STC03160  -STEPNAME PROCSTEP    RC   EXCP   CONN    TCB    SRB  CLOCK   SERV  WORKLOAD  PAGE  SWAP   VIO SWAPS

19.23.48 STC03160  -         CONGROUP    00    677    168    .00    .00     .0   8031  STCTASKS     0     0     0     0

19.23.48 STC03160  IEF404I EMCCGP - ENDED - TIME=19.23.48

19.23.48 STC03160  -EMCCGP   ENDED.  NAME-                     TOTAL TCB CPU TIME=    .00 TOTAL ELAPSED TIME=    .0

19.23.48 STC03160  $HASP395 EMCCGP   ENDED

0------ JES2 JOB STATISTICS ------

-  07 JAN 2010 JOB EXECUTION DATE

-            2 CARDS READ

-           58 SYSOUT PRINT RECORDS

-            0 SYSOUT PUNCH RECORDS

-            3 SYSOUT SPOOL KBYTES

-         0.00 MINUTES EXECUTION TIME

         1 //EMCCGP   JOB MSGLEVEL=1                                               STC03160

         2 //STARTING EXEC EMCCGP

         3 XXEMCCGP PROC SCGPPRFX='EMC.MFE700',

           XX        SSCFPRFX='EMC.MFE700',

           XX        CONFIG=CGRPCFG0

           XX* THE ONLY REQUIRED DD STATEMENT IN THE JCL IS THE CONFIG DD

           XX* STATEMENT. SEE THE CONFIG MEMBER FOR AN EXPLANATION OF THE

           XX* CONFIG FILE.

         4 XXCONGROUP  EXEC  PGM=CGRPMAIN,REGION=0M,TIME=1440

         5 XXSTEPLIB   DD  DSN=&SSCFPRFX..LINKLIB,DISP=SHR

           IEFC653I SUBSTITUTION JCL - DSN=EMC.MFE700.LINKLIB,DISP=SHR

         6 XX          DD  DSN=&SCGPPRFX..LINKLIB,DISP=SHR

           IEFC653I SUBSTITUTION JCL - DSN=EMC.MFE700.LINKLIB,DISP=SHR

         7 XXSYSABEND  DD  SYSOUT=*

         8 XXSCF$ES70  DD DUMMY    <- NAZWA DYNAMICZNEGO SSID DLA SCF-A

         9 XXCONFIG    DD  DSN=&SCGPPRFX..PARMLIB(&CONFIG),DISP=SHR

           XX*CONFIGCA DD DSN=COMPLEMENTGROUP,DISP=SHR

           IEFC653I SUBSTITUTION JCL - DSN=EMC.MFE700.PARMLIB(CGRPCFG0),DISP=SHR

  STMT NO. MESSAGE

         2 IEFC001I PROCEDURE EMCCGP WAS EXPANDED USING SYSTEM LIBRARY SYS1.BRUT.PROCLIB

IEF695I START EMCCGP   WITH JOBNAME EMCCGP   IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN

IEF236I ALLOC. FOR EMCCGP EMCCGP

IGD103I SMS ALLOCATED TO DDNAME STEPLIB

IGD103I SMS ALLOCATED TO DDNAME

IEF237I JES2 ALLOCATED TO SYSABEND

IEF237I DMY  ALLOCATED TO SCF$ES70

IGD103I SMS ALLOCATED TO DDNAME CONFIG

IEF142I EMCCGP EMCCGP - STEP WAS EXECUTED - COND CODE 0000

IGD104I EMC.MFE700.LINKLIB                           RETAINED,  DDNAME=STEPLIB

IGD104I EMC.MFE700.LINKLIB                           RETAINED,  DDNAME=

IEF285I   XEMCUSR.EMCCGP.STC03160.D0000101.?           SYSOUT

IGD104I EMC.MFE700.PARMLIB                           RETAINED,  DDNAME=CONFIG

IEF373I STEP/CONGROUP/START 2010007.1923

IEF374I STEP/CONGROUP/STOP  2010007.1923 CPU    0MIN 00.15SEC SRB    0MIN 00.00SEC VIRT   112K SYS   252K EXT    7296K SYS   11676K

IEF375I  JOB/EMCCGP  /START 2010007.1923

IEF376I  JOB/EMCCGP  /STOP  2010007.1923 CPU    0MIN 00.15SEC SRB    0MIN 00.00SEC

With the same configuration previous version (with SCF 5.7) – starts and works properly.

See a example:

1                      J E S 2  J O B  L O G  --  S Y S T E M  R U T 1  --  N O D E  N B R U T

0

19.33.20 STC03161 ---- THURSDAY,  07 JAN 2010 ----

19.33.20 STC03161  IEF695I START EMCCGP## WITH JOBNAME EMCCGP## IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN

19.33.20 STC03161  $HASP373 EMCCGP## STARTED

19.33.20 STC03161  IEF403I EMCCGP## - STARTED - TIME=19.33.20

19.33.20 STC03161  CGRP000I ConGroup V6.3 (08/28/08-15.05 SCGP630-SC63014 ) Initializing

19.33.20 STC03161  EMCP001I MODE=SINGLE

19.33.20 STC03161  EMCP001I MSGLEVEL(5) STOPIEN SZCZEGOLOWOSCI KOMUNIKATOW

19.33.20 STC03161  EMCP001I USE_RDF_ECA=YES

19.33.30 STC03161  CGRP281I BUILD DATE: 08/28/08-15.05 SCGP630-SC63014

19.33.30 STC03161  CGRP112I MIH =  15

19.33.30 STC03161  EMCP001I AUTO_REFRESH=YES YES/NO

19.33.30 STC03161  EMCP001I DISABLE_AT_SHUTDOWN=NO YES/NO (DEFAULT)

19.33.30 STC03161  EMCP001I DISABLE_ON_VERIFY_ERROR=NO YES/NO (DEFAULT)

19.33.30 STC03161  EMCP001I DISPLAY_CONGROUP_LISTOPT=LIST NOLIST/LIST (DEFAULT)

19.33.30 STC03161  EMCP001I PAGEDEV_ALLOWED=NO YES/NO (DEFAULT)

19.33.30 STC03161  EMCP001I REMSPLIT_INTERVAL=10 10 SECONDS (DEFAULT)

19.33.30 STC03161  EMCP001I REMSPLIT_OPTION=NOESTERR

19.33.30 STC03161  EMCP001I RESUME_INTERVAL=10 10 SECONDS (DEFAULT)

19.33.30 STC03161  EMCP001I RESUME_OPTION=NOTRNMSG+RSMALLIT

19.33.30 STC03161  EMCP001I SAF_CLASS=DATASET

19.33.30 STC03161  EMCP001I SAF_PROFILE=EMC.VALIDATE.ACCESS

19.33.30 STC03161  EMCP001I SEMISYNC_ALLOWED=NO YES/NO (DEFAULT)

19.33.30 STC03161  EMCP001I VERIFY_INTERVAL=300 300 SECONDS (DEFAULT)

19.33.30 STC03161  EMCP001I SRDF_CONGROUP=TEST 8 CHAR NAME WITH ONLY SRDF AND STD DEVICES

19.33.30 STC03161  EMCP001I DEVICE_LIST=B02E-B02F ALL/9999/XXXXXX

19.33.30 STC03161  EMCP001I SUSPEND_FAILURE=FAIL RETRY/WTOR/FAIL (DEFAULT)

19.33.30 STC03161  CGRP104I EOS EXITS ARE INSTALLED

19.33.30 STC03161  CGRP050I SUBTASK FOR CONGROUP TEST     IS ACTIVE

19.33.30 STC03161  CGRP639I (02) Group TEST Starting polling threads

19.33.36 STC03161  CGRP639I (03) Group TEST Pollers Started

19.33.36 STC03161  CGRP635I GROUP TEST Setting poll rate to 15

19.33.36 STC03161  CGRP639I (04) Group TEST Pollers Initialized

19.33.36 STC03161  CGRP998I 2 polls outstanding. Delaying polls for 000290102206.

19.33.36 STC03161  CGRP635I GROUP TEST Setting poll rate to 1

19.33.36 STC03161  CGRP640I (03) Group TEST Group RECA Clear/Set Started

19.33.43 STC03161  CGRP634I (05) Group TEST All_Mirrors_Ready = TRUE

19.33.43 STC03161  CGRP634I (07) Group TEST All_Mirrors_NR = FALSE

19.33.43 STC03161  CGRP634I (01) Group TEST Zero_Invalid_Tracks = TRUE

19.33.43 STC03161  CGRP634I (03) Group TEST All_Mirrors_Synched = TRUE

19.33.43 STC03161  CGRP634I (15) Group TEST has lost some CG protection

19.33.43 STC03161  CGRP634I (12) Group TEST RDF-ECA defined on no devices

19.33.43 STC03161  CGRP634I (11) Group TEST RDF-ECA disarmed on all devices

19.33.43 STC03161  CGRP640I (09) Group TEST Clear Complete. Group RECA Set Started

19.33.44 STC03161  CGRP634I (13) Group TEST RDF-ECA defined on all devices

19.33.44 STC03161  CGRP634I (08) Group TEST RDF-ECA armed on all devices

19.33.44 STC03161  CGRP635I GROUP TEST Setting poll rate to 15

19.33.44 STC03161  CGRP640I (06) Group TEST Group RECA Set Complete

19.33.44 STC03161  CGRP148I CONGROUP TEST     IS ENABLED FOR CTLR=000290102206

19.33.44 STC03161  CGRP149I CONGROUP TEST     SUCCESSFULLY ENABLED

19.33.44 STC03161  CGRP143I ENABLE ALL CONGROUP PROCESSING COMPLETED

19.33.44 STC03161  CGRP611I Initialization Complete

         1 //EMCCGP## JOB MSGLEVEL=1                                               STC03161

         2 //STARTING EXEC EMCCGP##

         3 XXEMCCGP PROC SCGPPRFX='EMC.SCGP630',

           XX           SSCFPRFX='EMC.SSCF570',

           XX           CONFIG=CGRPCFG0

           XX*          CONFG2=CGRPCFG2

           XX*

           XX* STARA WERSJA CGROUP (6.3)

           XX*

           XX* THE ONLY REQUIRED DD STATEMENT IN THE JCL IS THE CONFIG DD

           XX* STATEMENT. SEE THE CONFIG MEMBER FOR AN EXPLANATION OF THE

           XX* CONFIG FILE.

           XX*

           XX* CONFIG2 DD IS OPTIONAL. USE IF THE CSC IDLEPOLL HAS BEEN CHANGED FRO

           XX*  THE DEFAULT.  OR, THE NEED TO USE A DIFFERENT CSC LISTENER FOR CGRP

           XX*  (NOT SDAS)

           XX**********************************************************************

          XX* SMBL: SUB-MSTR (IF YOU ARE RUNNING AUTOSWAP)

           XX* MY URUCHAMIAMY 'START'-> S EMCCGRP

           XX* STOP EMCCGRP:            P EMCCGRP

           XX*

           XX**********************************************************************

         4 XXCONGROUP  EXEC  PGM=CGRPMAIN,REGION=0M

         5 XXSTEPLIB   DD  DSN=&SSCFPRFX..LINKLIB,DISP=SHR

           IEFC653I SUBSTITUTION JCL - DSN=EMC.SSCF570.LINKLIB,DISP=SHR

         6 XX          DD  DSN=&SCGPPRFX..LINKLIB,DISP=SHR

           IEFC653I SUBSTITUTION JCL - DSN=EMC.SCGP630.LINKLIB,DISP=SHR

         7 XXSYSABEND  DD  SYSOUT=X

         8 XXCONFIG    DD  DSN=&SCGPPRFX..SAMPLIB(&CONFIG),DISP=SHR

           XX*CONFIG2   DD  DSN=&SCGPPRFX..SAMPLIB(&CONFG2),DISP=SHR

           IEFC653I SUBSTITUTION JCL - DSN=EMC.SCGP630.SAMPLIB(CGRPCFG0),DISP=SHR

  STMT NO. MESSAGE

         2 IEFC001I PROCEDURE EMCCGP## WAS EXPANDED USING SYSTEM LIBRARY SYS1.BRUT.PROCLIB

IEF695I START EMCCGP## WITH JOBNAME EMCCGP## IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN

IEF236I ALLOC. FOR EMCCGP## EMCCGP##

IGD103I SMS ALLOCATED TO DDNAME STEPLIB

IGD103I SMS ALLOCATED TO DDNAME

IEF237I JES2 ALLOCATED TO SYSABEND

IGD103I SMS ALLOCATED TO DDNAME CONFIG

CGRP000I ConGroup V6.3 (08/28/08-15.05 SCGP630-SC63014 ) Initializing

EMCP001I MODE=SINGLE

EMCP001I MSGLEVEL(5) STOPIEN SZCZEGOLOWOSCI KOMUNIKATOW

EMCP001I USE_RDF_ECA=YES

IEF237I DMY  ALLOCATED TO CGRP60

CGRP281I BUILD DATE: 08/28/08-15.05 SCGP630-SC63014

CGRP112I MIH =  15

EMCP001I AUTO_REFRESH=YES YES/NO

EMCP001I DISABLE_AT_SHUTDOWN=NO YES/NO (DEFAULT)

EMCP001I DISABLE_ON_VERIFY_ERROR=NO YES/NO (DEFAULT)

EMCP001I DISPLAY_CONGROUP_LISTOPT=LIST NOLIST/LIST (DEFAULT)

EMCP001I PAGEDEV_ALLOWED=NO YES/NO (DEFAULT)

EMCP001I REMSPLIT_INTERVAL=10 10 SECONDS (DEFAULT)

EMCP001I REMSPLIT_OPTION=NOESTERR

EMCP001I RESUME_INTERVAL=10 10 SECONDS (DEFAULT)

EMCP001I RESUME_OPTION=NOTRNMSG+RSMALLIT

EMCP001I SAF_CLASS=DATASET

EMCP001I SAF_PROFILE=EMC.VALIDATE.ACCESS

EMCP001I SEMISYNC_ALLOWED=NO YES/NO (DEFAULT)

EMCP001I VERIFY_INTERVAL=300 300 SECONDS (DEFAULT)

EMCP001I SRDF_CONGROUP=TEST 8 CHAR NAME WITH ONLY SRDF AND STD DEVICES

EMCP001I DEVICE_LIST=B02E-B02F ALL/9999/XXXXXX

EMCP001I SUSPEND_FAILURE=FAIL RETRY/WTOR/FAIL (DEFAULT)

CGRP104I EOS EXITS ARE INSTALLED

CGRP050I SUBTASK FOR CONGROUP TEST     IS ACTIVE

CGRP639I (02) Group TEST Starting polling threads

CGRP639I (03) Group TEST Pollers Started

CGRP635I GROUP TEST Setting poll rate to 15

CGRP639I (04) Group TEST Pollers Initialized

CGRP998I 2 polls outstanding. Delaying polls for 000290102206.

CGRP635I GROUP TEST Setting poll rate to 1

CGRP640I (03) Group TEST Group RECA Clear/Set Started

CGRP634I (05) Group TEST All_Mirrors_Ready = TRUE

CGRP634I (07) Group TEST All_Mirrors_NR = FALSE

CGRP634I (01) Group TEST Zero_Invalid_Tracks = TRUE

CGRP634I (03) Group TEST All_Mirrors_Synched = TRUE

CGRP634I (15) Group TEST has lost some CG protection

CGRP634I (12) Group TEST RDF-ECA defined on no devices

CGRP634I (11) Group TEST RDF-ECA disarmed on all devices

CGRP640I (09) Group TEST Clear Complete. Group RECA Set Started

CGRP634I (13) Group TEST RDF-ECA defined on all devices

CGRP634I (08) Group TEST RDF-ECA armed on all devices

CGRP635I GROUP TEST Setting poll rate to 15

CGRP640I (06) Group TEST Group RECA Set Complete

CGRP148I CONGROUP TEST     IS ENABLED FOR CTLR=000290102206

CGRP149I CONGROUP TEST     SUCCESSFULLY ENABLED

CGRP143I ENABLE ALL CONGROUP PROCESSING COMPLETED

CGRP611I Initialization Complete

Any idea ?

Marcin