
UNSOLVED
E
electricbroom
16 Posts
0
24865
October 5th, 2008 02:00
Gen 4 Memory?
I want to upgrade my memory and the Crucial tester states I have pc5200 memory. It also states I do not have dual channel which I do. What memory can I use since I can not find pc5200 anymore? Thanks.
925 ex motherboard
3 gig ram
Gen 4 system.
Responses (13)
Solutions (0)
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
347
0
Posted October 5th, 2008 03:00
electricbroom,
The Gen 4 Manual specifications state the following:
Type = 400-MHz PC2-3200 and 533-MHz PC2-4200 DDR2 unbuffered SDRAM
Memory connectors = 4
Memory capacities = 128-GB, 256-GB, 512-GB, or 1-GB non-ECC
Minimum memory = 256 MB
Maximum memory = 4 GB
I went to the Crucial site and it list the DDR2 PC2-4200, not the PC2-5200?
DELL-Chris M (old account)
#IWork4Dell
electricbroom
16 Posts
347
0
Posted October 10th, 2008 22:00
I have 3 gig but not sure of speed...Crucial says pc5200 but I think their tester is wrong..I installed new video card and windows now reports only 2.25 gii ram. I guess videcard reassigned memory address. I want to take out the 2 512's and put in 2 1 gigs..electricbroom
16 Posts
347
0
Posted October 12th, 2008 00:00
It reports 3 gig of pc4300...Go figure, no such memory.electricbroom
16 Posts
347
0
Posted October 12th, 2008 00:00
Actually CPUz told me that it was pc4300...Crucial tester says pc5300....It must be pc4200 is my guess.
electricbroom
16 Posts
129
0
Posted October 12th, 2008 00:00
Whats best? Micron or Kingston?
Thanks.
PC 4300 memory is 533mhz memory.
See here for an example to show this
Here are the memory spec listing from you service manual
The crucial tester has to be incorrect.
Memory
Type
400-MHz and 533-MHz DDR2 unbuffered SDRAM
Here is also info from Crucial
http://www.crucial.com/store/listparts.aspx?model=Dimension%20XPS%20Generation%204
Message Edited by Davet50 on 10-11-2008 09:28 PM

electricbroom
16 Posts
347
0
Posted October 5th, 2008 03:00
I used the memory tester that you download, I think it was off anyway because it stated pc5200 and that it is a Gen 3.(incorrect). I must have pc4200 I guess...?