Start a Conversation
UNSOLVED

Sarel

updated

15 years ago

S

Sarel

1 Message

0

6417

July 1st, 2011 03:00

Precision and 10GbE Support

I would like to know if any of the current desktop or rack Precision workstations will work with a standard PCIe 10GbE NIC. It will be either an Intel or Broadcom 10GbE Cu NIC. I cannot find anything that explicitly states that it will work. OS will be Windows 7. Thanks

  • S

    speedstep

    11 Legend

    •

    46969 Posts

    1248

    1

    Posted July 1st, 2011 05:00

     

    I would say yes if its PCIE but I would recommend getting it from Dell.

    DELL Dell - Broadcom 57710 Single Port 10GbE NIC, Copper CAT6 PCIe

    DELL Dell - Broadcom 57710 Single Port 10GbE NIC, Copper CAT6 PCIe ...

    Highlights
    • Features driver support for Windows and Linux
    • Supported by Dell Technical Support when used with a Dell system
    Overview
    The Broadcom BCM 57710 from Dell™ is a single port 10G BASE-T Ethernet network adapter card. It features x8 PCI Express® host interface and one CAT-6a twisted pair interface via an RJ-45 connector. The adapter card uses the BCM 57710A 10G Ethernet MAC and the Solarflare® SFX 7101 10G BASE-T Ethernet transceiver to implement the single port 10G BASE-T NIC. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.

    Manufacturer Part# : RK339
    Dell Part# : 430-2834

Dell Support Resources

Latest Solutions

View More