Solved!
Go to SolutionR
rangergord09
11 Posts
0
6719
June 30th, 2015 06:00
1707FPVt, dying?
Have a 1707FPVt for about 8 years and up to now has worked well. In the last week the following are the symptoms:
- every time I started up the PC the monitor power button would blink for a period of time with a blank/black screen then would come on and be fine for the rest of the session.
- the time between turning on the PC and the monitor coming back is getting longer each day. At first it was less than a minute and today it's been over half an hour and still not back.
- looked at the manual and tried the input switch and the reset button procedure mentioned in one of the support posts - all with no effect.
- changed the DVI input to VGA and still no change.
- anyone know anything I can try to get it back?
- otherwise looks like a new monitor. And I liked this one: full vertical and tilt adjust and good pic.
Help appreciated
rangergord09
11 Posts
419
0
Posted June 30th, 2015 06:00
Should have added that even with no inputs (DVI/VGA) connected the same thing: blinking and no response.
rangergordxx
1 Rookie
•
18 Posts
419
0
Posted July 2nd, 2015 06:00
It's what I thought. Have ordered another one. Thanks
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
419
0
Posted July 1st, 2015 08:00
Based on your troubleshooting, sounds faulty. it is not worth it to spend money getting it repaired locally.
DELL-Chris M (old account)
#IWork4Dell