UNSOLVED
Backup NDMP (Again)
Hi All,
I have config Networker server 7.2.x with EMC NAS NS500 and set client with backup command by "nsrdndmp -M -T dump".
When I start group it will show error as:
* thgbnklak1ms004:/ nsrndmp_save: Performing backup to Non-NDMP type of device
* thgbnklak1ms004:/ nsrdsa_save: DSA savetime = 1191387661
* thgbnklak1ms004:/ nsrndmp_save: NDMP Service Debug: The process id for NDMP service is 0xee9807cc
* thgbnklak1ms004:/ nsrdsa_save: READY:(host, ipaddr, port) = (thgbnklak1ms009.code1.emi.philips.com, 172.16.10.31, 9812)
* thgbnklak1ms004:/ nsrndmp_save: Host = thgbnklak1ms009.code1.emi.philips.com (172.16.10.31) port = 9812
* thgbnklak1ms004:/ nsrndmp_save: data connect: failed to establish connection
* thgbnklak1ms004:/ nsrndmp_save: Unable to start the NDMP backup process.
* thgbnklak1ms004:/ nsrdsa_save : Aborted
* thgbnklak1ms004:/ nsrndmp_save: thgbnklak1ms004: / level=full, 0 KB 00:01:15 0 file
* thgbnklak1ms004:/ nsrndmp_save: Save session closed with NW server successfully
* thgbnklak1ms004:/
* thgbnklak1ms004:/ nsrndmp_save: backup failed.
10/03/07 12:02:24 nsrd: runq: NSR group nas exited with return code 1.
10/03/07 12:03:07 nsrd: write completion notice: Writing to volume NTSERVER.day.408 complete
What that happended and How I will to solve this problem?.
Many Thank.
I have config Networker server 7.2.x with EMC NAS NS500 and set client with backup command by "nsrdndmp -M -T dump".
When I start group it will show error as:
* thgbnklak1ms004:/ nsrndmp_save: Performing backup to Non-NDMP type of device
* thgbnklak1ms004:/ nsrdsa_save: DSA savetime = 1191387661
* thgbnklak1ms004:/ nsrndmp_save: NDMP Service Debug: The process id for NDMP service is 0xee9807cc
* thgbnklak1ms004:/ nsrdsa_save: READY:(host, ipaddr, port) = (thgbnklak1ms009.code1.emi.philips.com, 172.16.10.31, 9812)
* thgbnklak1ms004:/ nsrndmp_save: Host = thgbnklak1ms009.code1.emi.philips.com (172.16.10.31) port = 9812
* thgbnklak1ms004:/ nsrndmp_save: data connect: failed to establish connection
* thgbnklak1ms004:/ nsrndmp_save: Unable to start the NDMP backup process.
* thgbnklak1ms004:/ nsrdsa_save : Aborted
* thgbnklak1ms004:/ nsrndmp_save: thgbnklak1ms004: / level=full, 0 KB 00:01:15 0 file
* thgbnklak1ms004:/ nsrndmp_save: Save session closed with NW server successfully
* thgbnklak1ms004:/
* thgbnklak1ms004:/ nsrndmp_save: backup failed.
10/03/07 12:02:24 nsrd: runq: NSR group nas exited with return code 1.
10/03/07 12:03:07 nsrd: write completion notice: Writing to volume NTSERVER.day.408 complete
What that happended and How I will to solve this problem?.
Many Thank.
amediratta
2 Intern
•
2014 Posts
478
0
Posted October 4th, 2007 10:00
It should depending on the permissions available.
Check admin guide.tfaucille3
7 Posts
478
0
Posted April 22nd, 2008 05:00
try as backup command
nsrndmp_save -M -P thgbnklak1ms009.code1.emi.philips.com -I thgbnklak1ms009.code1.emi.philips.com -T dump- i never tried nsrndmp -M option which is NDMP DSA method
however, 2 things that i can think of about this error meesages
1. user name and password...yes, it can accept default, but if you are configuring non-ndmp device then i wonder where you supply these login info..
2. tape device at storage node unable to start nsrmmd...check server config of the jukebox - The error is here:
nsrndmp_save: data connect: failed to establish connection
Failed to establish happens for usually one of the following reasons:
1) Username and/or password specified is incorrect (keep in mind that it is case sensitive and on the Celerra the username must be ndmp.
2) You do not have a valid NDMP client connection license in NetWorker to backup this client.
3) You do not have a valid storage node specified in the client resource....since you are using -M (ndmpdsa) you should have either the NetWorker server itself (nsrserverhost) or the hostname of a valid NetWorker (non-NDMP) Storage node listed.
Please let me know if the above helps.
One trick you can try with the ndmp account....if you have ftp enabled on the datamover....ftp to the datamover from the NetWorker server and try logging in using the same ndmp user account and the password you are specifying in NetWorker. If that logs in successfully, you know the ndmp account is valid.
amediratta
2 Intern
•
2014 Posts
478
0
Posted October 3rd, 2007 06:00
1. Is NAS available on ping, nslookup?
2. Is the ndmp service working on NAS?
3. Did you enter the correct user name & password in the client resource for the NAS box?
This should help.