
UNSOLVED
Recognizes network, but won't connect...
My sister came home from college and I am having the hardest time connecting her to the wireless network in my home. She has a Inspiron 1150 with a 1350 internal wireless card. The message I get is "The following wireless networks are available. To access a wireless network, select it from the list, and then click Connect." Then, "This wireless network is not secure. Because a network key (WEP) is not used for authentication or for data encryption, data sent over this network might be subject to unauthorized access." When I click "Allow me to connect to the selected wireless network, even though it is not secure" it says "wireless connection is unavailable" I also tried to set it up again and just happened to click on ad-hoc network, and it connects and says signal strength is excellent. I also have my own laptop (Inspirion 1100 with a TrueMobile 1150 card) connected to the network and it is NOT connected through the ad-hoc option.
The network set up is a Comcast connection to a Netgear wireless router and is directly connected to a Dimension 2400. Both the Dimension and the Inspiron 1100 connect to the network and internet with no problem. I have tried working with Windows to configure the network, along with the Dell Wireless utility. I have used disks and flash drives to try to set up the network, I have also printed out the settings and tried to manually configure the network. I have been on numerous websites and changed all internet settings and nothing has worked. I have even freshly formatted this computer- still no fix. If you have any suggestions I will be eternally grateful! Thanks in advance for the help!
** Must also add that the Inspirion 1150 works just fine when connected to my TrueMobile 1150 card; however, my Inspirion 1100 will not work with a 1350 card that I have.
Message Edited by JMunizza on 05-19-2005 08:48 AM
Responses (1)
Solutions (0)

volcano11
2 Intern
•
27973 Posts
60
0
Posted May 20th, 2005 04:00
Ad-hoc connections are used to connect one wireless network card to another. You should not be using that mode. To eliminate a software problem, try connecting with an ethernet connection directly to the router. If that works, that it is not likely a software problem. Report back what you find.
Steve