
UNSOLVED
Closed
Optiplex 3060 boot issue
Optiplex 3060
Hi when this pc boots I get an error, about date and time not set (continue/run bios/diagnostics).
Sounds like pretty standard battery dead - yes? - no
I replaced the battery (duracell cr2032) - same error.
I took the battery out and re-seated it - same error
I replaced the battery with a different one from a brand new packet - same error.
I took the battery out and gently bent up the contacts - same error.
Dell Support Assist diagnostics reveals nothing helpful.
I'm at a loss what to try next -
any suggestions?
Responses (8)
Solutions (0)
bradthetechnut
9 Technologist
•
9706 Posts
•
40906 Points
168
0
Posted June 25th, 2023 19:00
If it's still not working without the error: How to Perform a BIOS or CMOS Reset and Clear the NVRAM on Dell Computers
bradthetechnut
9 Technologist
•
9706 Posts
•
40906 Points
113
0
Posted June 29th, 2023 14:00
Shoot, sorry too see troubleshooting steps aren't working. There's not too many steps for date/time not working. Sounds like there may be something wrong with CMOS itself (corrupted?). If there is, that takes motherboard replacement as far as I know. Or you'd end having to hit F1 to continue every time for every boot.
Another option is the "Get help now" button on the lower right of the screen.
bradthetechnut
9 Technologist
•
9706 Posts
•
40906 Points
25
0
Posted August 1st, 2023 12:00
One could try updating it. May be with any luck, it will cure the date/time problem. However, I can't make any guarantees. If BIOS isn't working properly, attempting to update it may brick the MB. Another "however," good news is the 3060 also has BIOS recovery in case of such an incident. BIOS Recovery Steps for a No Post issue on OptiPlex

JOcean
11 Legend
•
12621 Posts
•
69453 Points
206
0
Posted June 23rd, 2023 04:00
Did you leave the battery out of the system for 15 minutes before installing a new battery?
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop