Hello, Recently purchased two identical R900s currently running bios 1.2.0.


Problem is one of them, when it boots up and you see the Dell logo and does the memtest, right after that the screen goes black for a quick second and you know how on the top right you have:

F2 for setup
F10 For boot options
F11 For something I cant remember
F12 for PXE

When its done with the Dell logo and flashes to where you'd see the Perc6 starting up and DRAC and all those goodies, it shows:

F2 for setup
F10 for boot
F11 for something
Entering PXE Boot

I have in the bios disabled via integrated devices PXE for all 4 network ports. They are set to "enabled" - Not "Enabled with PXE"

Under boot sequence, it shows:

Virtual Floppy
VIrtual CD
Virtual USB
CD Rom
Hard Drive

Doesn't show the network card.

Problem is it magically hits F12 every time it reboots, even when there is no keyboard attached. I cannot figure this out at all, does anyone have any ideas?