
Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
Solved!
Go to SolutionT410 Voltage Sensor fail
I have a T410 that shuts off after about 30 seconds with no errors or warnings, When I ran the Hardware Diags, the system failed with a failure code of: Error Code IPMI 2900:0221, MSG, System Board:: Voltage Sensor (5V PC) State Asserted "System Board". I am not able to stay logged onto the server in normal mode but can keep the server running in Safe Mode. I was not able to locate any errors in the Windows logs that indicate anything amiss in the OS, By the time the remote location notified us that they were experiencing issues with this unit constantly rebooting the RAID has experienced massive disk corruption which I was able to correct with Disk Check. The server will boot with no errors or messages and then just power off after about 30 seconds with no warning. Can this component be replaced and is so then what would be the part #, Since this is out of warranty I am looking for any assistance possible to repair this issue as this is still a good server that just happened to fail following the warranty expiration.
Thank you
Responses (0)
Solutions (0)
