UNSOLVED

Gord51

updated

23 years ago

G

Gord51

1 Message

0

5456

March 3rd, 2004 02:00

entry point not found

My problem started with my computer freezing up for about a minute at each new web page but everthing else was working fine. I called my cable company and they said everthing looked fine and said I should try reinstalling IE. The freezing up was making that a pain so I decided to reinstall XP. During the install I got the message

SPINGFLD_ADV_DAEMON:WksCal.exe-Entry Point The procedure entry point GetIums cannot be located in the dynamic link library. When I started the computer after the install I got a message to reinstall the sound card driver so I reinstalled SB Live but still got a diagnostic fail and instructions to do it again so I thought I'd turn to system restore but I got a message that it's entry point could not be found. I'm desperate now someone help please.

  • hunter_03

    14 Posts

    2097

    0

    Posted March 3rd, 2004 02:00

    Hi Gord51

    Could you tell me how r u installing your windows XP. R U installing it by putting the CD in desktop and running setup, the reason i asked this is because wkscal.exe is the works calender file and u will get an error only when u r installing the above way. If u want to install windows xp then take a backup and do a clean reinstallation. This will take care of all the problems u have stated.

    U have some snapshots for installation

    http://www.windowsreinstall.com/winxppro/installxpcdparallell/index.htm

     

  • jwatt

    4446 Posts

    2097

    0

    Posted March 3rd, 2004 03:00

    This error is most commonly associated with Microsoft Works. Did you attempt a repair install? If so, you may be able to get the message to stop by unselecting the "Reminders" feature in Works, as described in this article.

    Jim
  • bcarmich

    1 Message

    2097

    0

    Posted March 3rd, 2004 17:00

    Gord51,

    Before you go nuts on a clean reinstall of windows do a search on this forum using the keywords ..

    getiums msdart.dll

    This will list previous users with the same condition and a proposed fix.

    www.tdatacorp.com/faq/dartfix.bat

    I had the same problem you had on the weekend and tried the same fix ie reload windows, and I have the same problem you do with the stupid message.

    I'm going to try the fix tonight.

    Good luck!

    Bruce

  • gryjhnhpe

    2 Intern

    •

    1956 Posts

    2097

    0

    Posted March 3rd, 2004 21:00


    hunter_03 wrote:   Hi Gord51    do a clean reinstallation. This will take care of all the problems u have stated.

    U have some snapshots for installation

    http://www.windowsreinstall.com/winxppro/installxpcdparallell/index.htm


    The above link is for a parallel install (Not recommended by Microsoft) not a Clean Install either.

    I have shown the supersite link last as it assumes Clean Install status so doesn't include step to delete existing partition at step 5 & so achieve Clean Install status.

    Use  this link & select XP Home or PRO then method , ie: Used Hard Drive , Multi_Page has text & large pictures of Clean Install.
    http://www.windowsreinstall.com/

    Use this link for Clean Install of XP , if you click on Pictures they Expand for easy view
    http://www.michaelstevenstech.com/cleanxpinstall.html (Delete existing partition at step 10b for Clean Install)

    or use this link ( *** Delete existing partition at step 5 for Clean Install ***)
    http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp


    Clean Install deletes existing partition (like FDISK)  &  Formats HD during Install of Windows XP  from XP CD.
    Set BIOS to use CD-ROM as 1st boot device usually by pressing "F2" key during boot (startup),
    for some Computers press "Del" key
    Re-start Computer & when message "Press any key to boot from CD" shows do it & let subsequent messages "Press any key...." time out to Windows setup.