UNSOLVED
GB
gunalan.bhaskar
2 Posts
0
3307
June 25th, 2015 05:00
Connecting multiple WYSE terminals
Connecting multiple WYSE terminals
Hi,
I'm able to connect multiple system to do imaging but when I connect a hub to connect multiple WYSE terminals. It picks two wyse terminals but rest are not given any IP addresses. I switched the wyse terminal just to rule out hardware issues. It gets stuck on the window saying looking up for ip add-dhcp...
-Any limitations on number of wyse terminals that could be connected to single switch port.
-has the switch port be changed to trunk mode.
Looking for inputs. Thanks.
Rmontalvo1
623 Posts
628
0
Posted June 25th, 2015 05:00
It would help if you provide some more details on the Wyse terminals you have, what are you using for imaging, what version of firmware or imaging program you are using. Wyse makes a lot of different products, so the more details you can provide, the easier it will be to help you.
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
gunalan.bhaskar
2 Posts
628
0
Posted June 25th, 2015 05:00
Using WYSE C10LE . I don't have to image these as it picks the Citrix enviroment automatically.