1. You can upgrade from 2.0.0.2 to 2.0.1.2 without issues. So you should be fine to upgrade directly to the latest version. I'd recommend always reading the release notes anyway, just in case.
2. Always upgrade the SDS before the SDC. So the procedure you found is correct: Gateway -> MDM/TB -> SDS -> SDC.
3. In terms of backup and restore of config, there isn't an official procedure it wouldn't be a bad idea to backup anything under /opt/emc/scaleio/*/cfg/*
jeffwisman
2 Posts
0
March 8th, 2017 16:00
1. You can upgrade from 2.0.0.2 to 2.0.1.2 without issues. So you should be fine to upgrade directly to the latest version. I'd recommend always reading the release notes anyway, just in case.
2. Always upgrade the SDS before the SDC. So the procedure you found is correct: Gateway -> MDM/TB -> SDS -> SDC.
3. In terms of backup and restore of config, there isn't an official procedure it wouldn't be a bad idea to backup anything under /opt/emc/scaleio/*/cfg/*
Thanks,
Jeff Wisman
i_iinuma
9 Posts
0
March 15th, 2017 11:00
Hello Jeff,
Thank you for answering my question. I understand about that and I can prepare upgrading.
Regards,
Ichiro