Solved!
Go to Solution753
0
Posted February 3rd, 2009 13:00
is " Volume_Set_Addressing(V)" flag enabled on the FA ?753
0
Posted February 3rd, 2009 14:00
symcfg list -sid 123 -FA 8a -p 0 -v
substitute for your FA/port and SID753
0
Posted February 3rd, 2009 14:00
Thanks Julie this is my first post here753
0
Posted February 3rd, 2009 14:00
vitales, welcome to the forums.
I've moved this thread from the Powerlink Lite forum into the Solutions Enabler forum since you are registered as a customer and have access to all the forums.
Julie Gibson
Forums Admin753
0
Posted February 3rd, 2009 14:00
How can i check this dynamox ?753
0
Posted February 3rd, 2009 14:00
The Volume_Set_Addressing(V) is disabled753
0
Posted February 3rd, 2009 14:00
You can dump flags for a given processor with the following command:
symcfg -sid 1234 -FA 03A -P 1 -v list
You can easily find the flags Dynamox mentioned ...753
0
Posted February 3rd, 2009 14:00
ThX Julie ..753
0
Posted February 3rd, 2009 14:00
I prefer different box number
xe2sdc
6 Operator
•
2831 Posts
1181
0
Posted February 3rd, 2009 14:00
You have to either
1) change FA configuration to enable V (volumeset addressing) or
2) use symmask set hba_flags to enable V for your HBAs