
UNSOLVED
XPS8700 Ram specs
I purchased the XPX 8700 with the max available 16G, but it can be expanded to 32G, and I think I need to do that.
What CAS latency timings does it require? The most common seems to be 9-9-9-24, but there is also 8-8-8-24 and 7-8-8-24
Also what voltage should I buy? - available are 1.5 and 1.35 V
Responses (3)
Solutions (0)
Our specifications do not mention CAS latency timings or voltage. The XPS 8700 and the Alienware Aurora-R4 used the same Dell 8GB memory stick:
66GKY 8GB, 1600MHz, 512X64, 2RX8Hi Chris,
Can you please specify below properties of xps 8700 ram. (i guess DDR3L)
1. Voltage
2. Cas Latency
3. Timing
I need above details prior to purchase ram for an upgrade.
Thanks
Tharaka
DDR3 1600 1.5V, CAS 11 (11-11-11-28) is what I have seen in five of the 8700s I have touched personally.
Faster or different memory timings may or may not POST correctly and the BIOS may or may not downclock it to 1333 or it may not even POST.
I have read of people using DDR3 1600 CAS 9 memory that was down clocked to 1333.
I would trust Crucial, and I would even call them on the phone to check what their online tool suggests and ask what if it doesn't work.
After it installs, Validate the memory speed using Intel XTU (eXtreme Tuning Utility) or CPU-Z.
Your best option is to buy all new matching memory as a set as they are tested to work together.
That said, I have successfully added two sticks of 4GB memory to one of the 8700s in my family to get it to 16GB. The memory was DDR3 1600 and 11-11-11-28 was one of the tested timings. I don't recall the brand or details as I did not purchase it, I just suggested it and then installed it.

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
606
0
Posted December 13th, 2013 17:00
Our specifications do not mention CAS latency timings or voltage. The XPS 8700 and the Alienware Aurora-R4 used the same Dell 8GB memory stick:
66GKY 8GB, 1600MHz, 512X64, 2RX8
DELL-Chris M (old account)
#IWork4Dell