UNSOLVED
2001FP curios error situation: no OSD, power save mode on
Hi all,
the error situation is very curios and strange but hopefully somebody can help me ?!
1) no PC or sth else is attached
- When starting the DELL 2001FP the status message "Dell Ultra sharp" is
- When starting the DELL 2001FP the status message "Dell Ultra sharp" is
shown for a few seconds, that should be normal.
- no selftest-banner occurs
- no selftest-banner occurs
- choosing the menu button
no OSD menu occurs.
The input signal starts with 1 RGB
- choosing the input button it change from input 1 to 2
=> 2:DVI occurs for a second
=> 2:DVI occurs for a second
=> then it change to power save mode automatically
=> the power led changes from green to orange
=> the power led changes from green to orange
- choosing the input button it change from input 2 to 3
=> 3:DVI occurs for a second
=> 3:DVI occurs for a second
=> then it change to power save mode automatically
=> the power led changes from green to orange
=> the power led changes from green to orange
the same procedure happens for S-VHS and composite input
Pressing the menu button while the 2001FP is in power save mode, the message ... [input] is in power save mode occurs ... press any key or move mouse.
2) a PC is attached to RGB or DVI
Example: After connecting the 2001FP to DELL Latitude D820 Notebook and changing the output to internal and external display the cloned Notebook screen occurs for half a second on the 2001FP then display changes to black.
What's wrong with it ?
How can I fix it ?
Thanks for your help in advance.
Best regards,
Example: After connecting the 2001FP to DELL Latitude D820 Notebook and changing the output to internal and external display the cloned Notebook screen occurs for half a second on the 2001FP then display changes to black.
What's wrong with it ?
How can I fix it ?
Thanks for your help in advance.
Best regards,
Dieter
