UNSOLVED
Closed
T
Theoldtool
3 Posts
0
2197
December 26th, 2019 13:00
3008WFP, max resolution issue
Hi,
I cannot get my trusty 3008WFP to output its max resolution when used with my new pc. It has a GTX 260 Ti with only HDMI and DisplayPort outs. I am using a top quality HDMI cable but am only able to get 1920x1200 max resolution. Can I use an HDMI to DVI adapter to make it work?
stellarjets
2 Posts
1411
0
Posted September 3rd, 2020 18:00
I'm using my 3008WFP at 2560 x 1600 resolution at 30Hz refresh rate over HDMI.
On Linux you can add a modeline with xrandr to enable this custom resolution:
"2560x1600@30" 163.70 2560 2592 3208 3240 1600 1636 1644 1681
On windows you may be able use the above data with your graphics driver.
Alternatively this looks somewhat promising:
http://www.geocities.ws/podernixie/htpc/modeline-en.html
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
1575
0
Posted January 1st, 2020 08:00
HDMI to DVI adapter, unknown, we never tested it.
The 3008WFP HDMI in port is HDMI 1.1 which has a maximum display resolution of 1920x1080 60Hz.
The 3008WFP DP in port has a maximum display resolution of 2560x1600 60Hz.
So connect like this =
GTX 260 Ti DP out port --> DP to DP cable --> 3008WFP DP in port
DELL-Chris M (old account)
#IWork4Dell