Announcement Banner
UNSOLVED

PetersonPS

updated

16 years ago

P

PetersonPS

1 Rookie

•

39 Posts

0

3940

September 16th, 2010 03:00

Integration - Networker and Netapp NDMP

Hi,

could someone help me with the steps necessary to integrate the Networker 7.6 with Netapp Ontap 7.3.2?

- I need to install any agent / plugin on the NW server?
- You must configure the switches zonning for NW Server and Netapp?

I thank you for your attention

  • MikeToo1

    38 Posts

    831

    1

    Posted September 17th, 2010 06:00

    NetWorker/NetApp NDMP solution/integration can be designed in two ways...!!!
    1) Local NDMP backup ==> where you backup to locally attached devices on NAS side
    2) LAN based NDMP backup ==> where NDMP data from NAS is stream over LAN to NetWorker storage nodes(Windows or Unix host)
    In both cases there is no Networker Software Agent required on the NAS side.
    The backup happens via NDMP protocol which all NAS has.
    As far as SAN goes, it is recommended that all backup resources ie: NetWorker Server, NAS host and library/tape drives be SAN zoned together for sharing purposes of say tape drives.
    If there is no sharing of resources, then zoning can be independent for whatever purposes.
    Once systems are TCP/IP reachable, you are set to go with NetWorker NDMP implementation through Client resource creation, assignment of Client to Group, Group assignment to pools and ultimately devices assignment to Pools
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    831

    0

    Posted October 21st, 2010 03:00

    Mike, do you have some info if and when NW would support integration with NetApp's SnapVault?

    Cheers,

    H

  • wlee

    263 Posts

    831

    0

    Posted October 21st, 2010 04:00