Solved!
Go to SolutionNetworker 7.2.2 & c4
We are trying to set up a new Sun c4 jukebox with 2 lto3 drives to work with networker 7.2.2 under Solaris 9 SPARC.
After following the setup instructions, and running jbconfig the jukebox doesn't seem to be able to label tapes.
Any help would be appreciated.
---
Mon 15:06:25 nsrjb notice: nsrjb -j lt03 -Y -O3 -L -g -S 1-2
Mon 15:06:51 /dev/rmt/1cbn Verify label operation in progress
Mon 15:07:12 media warning: /dev/rmt/1cbn reading: read open error: drive status is There is not a tape
Mon 15:07:12 /dev/rmt/1cbn read open error: drive status is There is not a tape in the drive
Mon 15:07:12 /dev/rmt/1cbn Label without mount operation in progress
Mon 15:07:32 /dev/rmt/1cbn write open error: drive status is There is not a tape in the drive
Mon 15:07:34 /dev/rmt/1cbn Eject operation in progress
Mon 15:07:54 /dev/rmt/1cbn read open error: drive status is There is not a tape in the drive
Mon 15:09:02 /dev/rmt/1cbn Verify label operation in progress
Mon 15:09:22 media warning: /dev/rmt/1cbn reading: read open error: drive status is There is not a tape
Mon 15:09:22 /dev/rmt/1cbn read open error: drive status is There is not a tape in the drive
Mon 15:09:24 /dev/rmt/1cbn Label without mount operation in progress
Mon 15:09:44 /dev/rmt/1cbn write open error: drive status is There is not a tape in the drive
Mon 15:09:45 /dev/rmt/1cbn Eject operation in progress
After following the setup instructions, and running jbconfig the jukebox doesn't seem to be able to label tapes.
Any help would be appreciated.
---
Mon 15:06:25 nsrjb notice: nsrjb -j lt03 -Y -O3 -L -g -S 1-2
Mon 15:06:51 /dev/rmt/1cbn Verify label operation in progress
Mon 15:07:12 media warning: /dev/rmt/1cbn reading: read open error: drive status is There is not a tape
Mon 15:07:12 /dev/rmt/1cbn read open error: drive status is There is not a tape in the drive
Mon 15:07:12 /dev/rmt/1cbn Label without mount operation in progress
Mon 15:07:32 /dev/rmt/1cbn write open error: drive status is There is not a tape in the drive
Mon 15:07:34 /dev/rmt/1cbn Eject operation in progress
Mon 15:07:54 /dev/rmt/1cbn read open error: drive status is There is not a tape in the drive
Mon 15:09:02 /dev/rmt/1cbn Verify label operation in progress
Mon 15:09:22 media warning: /dev/rmt/1cbn reading: read open error: drive status is There is not a tape
Mon 15:09:22 /dev/rmt/1cbn read open error: drive status is There is not a tape in the drive
Mon 15:09:24 /dev/rmt/1cbn Label without mount operation in progress
Mon 15:09:44 /dev/rmt/1cbn write open error: drive status is There is not a tape in the drive
Mon 15:09:45 /dev/rmt/1cbn Eject operation in progress
- check that your devices are in the correct order, could be that it is loading it into 1cbn, which in your networker config is Drive 2, but physically 1cbn may be the 1st device, and 0cbn the 2nd......
Thanks!
This was exactly the problem.
I removed the jukebox and drives via nsradmin, and re-added them with 1cbn first, and it's working.
cfaller
96 Posts
110
0
Posted May 9th, 2006 19:00
have networker load up a tape into 1cbn, then use mt commands to see what device from unix level is actually loaded up...
also raise the jukebox waiting times, maybe the sun c4 is taking longer than the default jukebox load etc times, load sleep is by def 5, make it 10.