UNSOLVED
J
jcaballero
1 Rookie
•
3 Posts
0
1093
March 29th, 2021 07:00
Issues configuring 40Gb network
Hello all,
I have just joined a company that has a 40Gb network configured using Dell S6010 switches.
Now we have just bought a new Dell S5232F switch that should be connected to that network but I am having issues with it.
feature auto-breakout is enabled and when I connect one of it's interfaces to a computing nodes 40Gb network card, it's correctly detected and status up and speed 40Gb can be observed in the outputs.
It's just these switches are not compatible between them or I may be missing something out?
Any bit of light would be really appreciated.
Jose
DELL-Tim G
4 Apprentice
•
73 Posts
744
0
Posted April 9th, 2021 06:00
Hello Jose,
I guess your S6010s are running our OS9 which has a default setting of not doing negotiation
as opposed to your S5232Fs running OS10 and trying to negotiate speed on it's interfaces.
Both ends should either try a negotiation or just have a manual speed setting.
I would suggest you to set the S5232F interfaces to manual breakout (port-group option) and set speed 40000
Cheers,
Tim
DELL-Josh Cr
Community Manager
•
9744 Posts
•
44404 Points
881
0
Posted March 29th, 2021 11:00
Hi Jose,
Are the transceivers the same type? What happens when you try to connect? Does it not say that there is a link? If you manually set the speed does that change anything?