Good Day Friends,

we know that dell have many transceiver compatibility matrix for the dell network  devices, but I have a question , I have transceiver huawei P/N : 02310PVU Model : OSX080N04, 10GB-80KM-1550nm, and try to using it on Dell S4148F-ON, with Firmware OS10.5.2.3, but when i do show inventory media, the information is different like below : 

1/1/40 SFP28 SFP28 25GBASE-SR-AOC 03T1184***** false

does anyone can explain this..?

because we have problem power tx from that device,

here is when i check using : sh interface phy-eth 1/1/40 tranceiver , like below :

SW# show interface phy-eth 1/1/40 transceiver

SFP is present SFP1/1/40 Serial Base ID fields
SFP1/1/40 Id = 3
SFP1/1/40 Ext Id = 4
SFP1/1/40 Connector = 7
SFP1/1/40 Transceiver Code = 80000000
SFP1/1/40 Encoding = 6
SFP1/1/40 BR nominal = 103
SFP1/1/40 Length(SFM) Km = 0
SFP1/1/40 Length(OM3) 2m = 0
SFP1/1/40 Length(OM2) 1m = 0
SFP1/1/40 Length(OM1) 1m = 0
SFP1/1/40 Length(copper) 1m = 0
SFP1/1/40 Vendor Rev = 410
SFP1/1/40 Laser wavelength = 1550nm
SFP1/1/40 Tunable wavelength= 1550.0nm
SFP1/1/40 Check code base = 121
SFP1/1/40 Serial Extended ID fields
SFP1/1/40 Options = 1562
SFP1/1/40 BR max = 0
SFP1/1/40 BR min = 0
SFP1/1/40 Vendor SN = 03T118400975
SFP1/1/40 Datecode = 200316
SFP1/1/40 CheckCodeExt = 243

SFP1/1/40 Diagnostic Information
=================================================================
SFP1/1/40 Rx Power Measurement type = 104
=================================================================
SFP1/1/40 Temp High Alarm threshold = 80.0C
SFP1/1/40 Voltage High Alarm threshold = 3.63mV
SFP1/1/40 Bias High Alarm threshold = 120.0mA
SFP1/1/40 Tx power High Alarm threshold = 5.999922 dBm
SFP1/1/40 Rx power High Alarm threshold = -5.000381 dBm
SFP1/1/40 Temp Low Alarm threshold = -10.0C
SFP1/1/40 Voltage Low Alarm threshold = 2.97mV
SFP1/1/40 Bias Low Alarm threshold = 17.0mA
SFP1/1/40 Tx power Low Alarm threshold = -2.000395 dBm
SFP1/1/40 Rx power Low Alarm threshold = -26.020601 dBm
===============================================================
SFP1/1/40 Temp High Warning threshold = 73.0C
SFP1/1/40 Voltage High Warning threshold = 3.464mV
SFP1/1/40 Bias High Warning threshold = 112.0mA
SFP1/1/40 Tx power High Warning threshold = 4.000023 dBm
SFP1/1/40 Rx power High Warning threshold = -7.000571 dBm
SFP1/1/40 Temp Low Warning threshold = -3.0C
SFP1/1/40 Voltage Low Warning threshold = 3.134mV
SFP1/1/40 Bias Low Warning threshold = 20.0mA
SFP1/1/40 Tx power Low Warning threshold = 0.000000 dBm
SFP1/1/40 Rx power Low Warning threshold = -24.089354 dBm
==================================================================
SFP1/1/40 Temp High Alarm flag = False
SFP1/1/40 Voltage High Alarm flag = False
SFP1/1/40 Temp Low Alarm flag = False
SFP1/1/40 Voltage Low Alarm flag = False
SFP1/1/40 Temp High Warning flag = False
SFP1/1/40 Voltage High Warning flag = False
SFP1/1/40 Temp Low Warning flag = False
SFP1/1/40 Voltage Low Warning flag = False
====================================================================
SFP1/1/40 Temperature = 35.093C
SFP1/1/40 Voltage = 3.3V
SFP1/1/40 Rate select state = false
====================================================================
SFP Channel = 0
SFP Tx Bias Current = 0.0mA
SFP Tx power = no power
SFP Rx power = -12.225732 dBm
SFP Bias High Alarm flag = False
SFP Rx power High Alarm flag = False
SFP Rx LOS state = False
SFP Tx fault state = False
SFP Tx disable state = True
SFP Bias Low Alarm flag = False
SFP Rx power Low Alarm flag = False
SFP Bias High Warning flag = False
SFP Rx power High Warning flag = False
SFP Bias Low Warning flag = False
SFP Rx power Low Warning flag = False