UNSOLVED

jmstacey

updated

22 years ago

J

jmstacey

5 Posts

0

13853

December 31st, 2004 23:00

Dell Photo Printer 540 Conflicts

I installed the Dell Photo Printer 540 and ever since then, I've been having trouble with my HP Deskjet 960c.  I reinstalled the software because it keeps on printing pages with two tiny smiley faces on it when I turn it on.  I unplugged the printer and rebooted.  Just when I thought my problems were fixed, it started doing the same thing. I thought I could use 2 printers as long as the HP Deskjet 960c was set as my default.  Someone please help me!
 
Thanks,
Jenn
  • Super_J

    21 Posts

    1166

    0

    Posted January 3rd, 2005 14:00

    Jenn, try this and it should fix you up. Let me know though if it does or does not!
     
    1) Uninstall the HP and the 540.
    2) Reinstall the HP, then turn off and disconnect the HP from the PC.
    3) Reinstall the 540 while the HP is OFF and NOT CONNECTED to the PC.
    4) Once the 540 install is complete and working they can turn on and reconnect the HP to the PC.
     
    The problem is caused by the HP getting gibberish lodged in its queue upon install of the 540. Basically the HP is responding to install messages meant for the 540. The smiley faces are remnant of that confusion and cannot be easily removed from the queue via the control panel (gibberish doesn't register as a true job but prints anyhow). The best way to get rid of it once it has occurred is to destroy the queue completely (uninstall) then reinstall the 540 with the HP off and physically disconnected from the system so that HP cannot pick up the data.
     
    - J -
  • Super_J

    21 Posts

    1166

    0

    Posted January 3rd, 2005 14:00

    Jenn -

     I am going to research this for you, I'll get back to you on this a little later today.

     

    - J -

  • jmstacey

    5 Posts

    1166

    0

    Posted January 3rd, 2005 16:00

    Thanks so much Super_J.  You are awesome!  That fixed my problem.  I owe you a ton of thanks.  I was so frustrated.  Thanks again and you rock!

    Jenn

  • Super_J

    21 Posts

    1166

    0

    Posted January 3rd, 2005 16:00

    Anytime =)

    - J -

  • 1166

    0

    Posted February 7th, 2005 17:00

    I have the same problem, HP Deskjet 970 and a Dell Photo 540. I uninstalled and re-installed everything using the method described above, and it worked like a charm. Until I rebooted and tried printing again. Then right back to the same problem, I've done it twice so far and it works great the first time but then reverts back to the "smiley faces" and multiple pages... Any way I can prevent this from happening? Both are USB connected. Thanks in advance.
  • diddley99

    2 Posts

    1166

    0

    Posted February 7th, 2005 18:00

    I have a dell photo 540 and a lexmark x1150 printer.  When i install my photo printer my lexmark does not work and i have to keep uninstalling both and installing lexmark to get it working again which is very frustrating.  Both has usb ports - anyone know how to fix this
  • jmstacey

    5 Posts

    1166

    0

    Posted February 7th, 2005 21:00

    This solution orignally worked for the 2 printers, but within a week I had the same problem.  Now I've resorted to using the photo printer without it being connected to the computer.  I must say, I'm disappointed but have received no other solutions to this problem.

    Jenn

  • 1166

    0

    Posted February 8th, 2005 13:00

    After reading these posts I am going to continue using my 540 the way I have been. As a stand alone printer. I have a card reader connected to my computer and transfer pictures to print to a compact flash card. Then put the card in my 540. I don't think I am going to try to connect it to my computer after reading the posts. One thing I did notice in doing things the way I am is the picture file reads as corrupt if I try to edit it while the file is on my compact flash card. If I edit the file in a folder on my computer, save it, then copy it to the flash media it works really good. I have enough things to make my life harder wtihout adding more problems to it. I am glad I read the posts here before I connected it to my computer.
  • nucleon

    5 Posts

    1166

    0

    Posted February 12th, 2005 13:00

    I have just recovered from a near-disaster caused by installing the Photo printer 540 on my Dimension 8400. 

    Within a few days of this installation, the computer started to simply shut down by itself after being on for 2-3 minutes, and could not be restarted without holding the power button; the button flashed orange, and all diagnostic lights on the back were dark.  I tried reinstalling the latest software, and this lead to a stand-by/shut down that could not be reversed.  I actually unplugged everything from the unit and attempted to reseat all boards and memory.  The computer would then boot up, but shut itself down as before.  I was able to reboot and quickly uninstalled all 540 software.  The computer has functioned well since. 

    I do have an HP 3030 all in one attached as well; could this lead to a conflict so severe as to keep the computer from booting at all?  Is Dell aware of this?

  • Lulu_Axis

    10 Posts

    323

    0

    Posted March 2nd, 2005 21:00

    Hello!

       Hey, Sorry to Barge. -.-' I'm having some trouble. My father works at Dell, but he can't help now. ^.^; I was wondering, Our Dell PC is running Window's 2003 Enterprise Edition. We use it for all our printers and Internet Connection, BUT, We just obtained a Dell Photo Printer 540 (Of Course...) and I am trying to intstall the Printer Driver, When after starting Install Wizard (From Auto-run on CD-Rom) It tells me I need Windows 2000 or Windows XP OS to Operate. I know what that means and all, but the question is I was wondering if I could download or alter anything in order to make it think, or know I am operating an compatible OS. Any input would be great, and an Honor. (By the way I'm 15, so I can understand everything.)

    ~Thanks alot, I appreciate it.
    ~~Lulu Axis